API tools faq
paste
Advertisement
silver2row

dmesg...BBBlue

silver2row
Jun 1st, 2021
1,317
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 26.38 KB | None | 0 0
raw download clone embed print report
  1. debian@beaglebone:~/ardupilot/Tools/Linux_HAL_Essentials/pru/aiopru$ dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Linux version 4.19.94-ti-rt-r64 (voodoo@rpi4b4g-13) (gcc version 8.3.0 (Debian 8.3.0-6)) #1buster SMP PREEMPT RT Sat May 22 00:17:24 UTC 2021
  4. [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  5. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [    0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Blue
  7. [    0.000000] Memory policy: Data cache writeback
  8. [    0.000000] efi: Getting EFI parameters from FDT:
  9. [    0.000000] efi: UEFI not found.
  10. [    0.000000] cma: Reserved 48 MiB at 0x9c800000
  11. [    0.000000] On node 0 totalpages: 130560
  12. [    0.000000]   Normal zone: 1148 pages used for memmap
  13. [    0.000000]   Normal zone: 0 pages reserved
  14. [    0.000000]   Normal zone: 130560 pages, LIFO batch:31
  15. [    0.000000] CPU: All CPU(s) started in SVC mode.
  16. [    0.000000] AM335X ES2.1 (sgx neon)
  17. [    0.000000] random: get_random_bytes called from start_kernel+0xac/0x4d0 with crng_init=0
  18. [    0.000000] percpu: Embedded 17 pages/cpu s40864 r8192 d20576 u69632
  19. [    0.000000] pcpu-alloc: s40864 r8192 d20576 u69632 alloc=17*4096
  20. [    0.000000] pcpu-alloc: [0] 0
  21. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129412
  22. [    0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet
  23. [    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
  24. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  25. [    0.000000] Memory: 437828K/522240K available (13312K kernel code, 1095K rwdata, 4356K rodata, 1024K init, 390K bss, 35260K reserved, 49152K cma-reserved, 0K highmem)
  26. [    0.000000] Virtual kernel memory layout:
  27.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  28.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  29.                    vmalloc : 0xe0000000 - 0xff800000   ( 504 MB)
  30.                    lowmem  : 0xc0000000 - 0xdfe00000   ( 510 MB)
  31.                    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  32.                    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  33.                      .text : 0x(ptrval) - 0x(ptrval)   (14304 kB)
  34.                      .init : 0x(ptrval) - 0x(ptrval)   (1024 kB)
  35.                      .data : 0x(ptrval) - 0x(ptrval)   (1096 kB)
  36.                       .bss : 0x(ptrval) - 0x(ptrval)   ( 391 kB)
  37. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  38. [    0.000000] ftrace: allocating 42175 entries in 124 pages
  39. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
  40. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  41. [    0.000000] rcu:     RCU priority boosting: priority 1 delay 500 ms.
  42. [    0.000000]  No expedited grace period (rcu_normal_after_boot).
  43. [    0.000000]  Tasks RCU enabled.
  44. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
  45. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  46. [    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
  47. [    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  48. [    0.000025] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
  49. [    0.000041] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  50. [    0.000050] OMAP clocksource: timer1 at 24000000 Hz
  51. [    0.001583] timer_probe: no matching timers found
  52. [    0.001928] Console: colour dummy device 80x30
  53. [    0.001975] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
  54. [    0.001979] This ensures that you still see kernel messages. Please
  55. [    0.001982] update your kernel commandline.
  56. [    0.002019] Calibrating delay loop (skipped) preset value.. 995.32 BogoMIPS (lpj=1990656)
  57. [    0.002034] pid_max: default: 32768 minimum: 301
  58. [    0.002372] Security Framework initialized
  59. [    0.002384] Yama: becoming mindful.
  60. [    0.002549] AppArmor: AppArmor initialized
  61. [    0.002685] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  62. [    0.002697] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  63. [    0.004054] CPU: Testing write buffer coherency: ok
  64. [    0.004125] CPU0: Spectre v2: using BPIALL workaround
  65. [    0.004693] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  66. [    0.025601] Setting up static identity map for 0x80100000 - 0x80100060
  67. [    0.041490] rcu: Hierarchical SRCU implementation.
  68. [    0.068748] EFI services will not be available.
  69. [    0.073519] smp: Bringing up secondary CPUs ...
  70. [    0.073537] smp: Brought up 1 node, 1 CPU
  71. [    0.073549] SMP: Total of 1 processors activated (995.32 BogoMIPS).
  72. [    0.073556] CPU: All CPU(s) started in SVC mode.
  73. [    0.075447] devtmpfs: initialized
  74. [    0.109931] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  75. [    0.110744] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  76. [    0.110776] futex hash table entries: 256 (order: 2, 16384 bytes)
  77. [    0.114924] xor: automatically using best checksumming function   arm4regs
  78. [    0.114943] pinctrl core: initialized pinctrl subsystem
  79. [    0.116633] NET: Registered protocol family 16
  80. [    0.123223] DMA: preallocated 1024 KiB pool for atomic coherent allocations
  81. [    0.205226] l4_wkup_cm:clk:0010:0: failed to disable
  82. [    0.246327] audit: initializing netlink subsys (disabled)
  83. [    0.249665] audit: type=2000 audit(0.248:1): state=initialized audit_enabled=0 res=1
  84. [    0.258433] OMAP GPIO hardware version 0.1
  85. [    0.263091] GPIO line 106 (LS_BUF_EN) hogged as output/high
  86. [    0.283260] hw-breakpoint: debug architecture 0x4 unsupported.
  87. [    0.313709] raid6: using algorithm int32x8 gen() 0 MB/s
  88. [    0.313725] raid6: .... xor() 0 MB/s, rmw enabled
  89. [    0.313732] raid6: using intx1 recovery algorithm
  90. [    0.324864] edma 49000000.edma: TI EDMA DMA engine driver
  91. [    0.331859] SCSI subsystem initialized
  92. [    0.333740] libata version 3.00 loaded.
  93. [    0.334122] usbcore: registered new interface driver usbfs
  94. [    0.334216] usbcore: registered new interface driver hub
  95. [    0.334367] usbcore: registered new device driver usb
  96. [    0.335748] pps_core: LinuxPPS API ver. 1 registered
  97. [    0.335761] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  98. [    0.335788] PTP clock support registered
  99. [    0.336881] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
  100. [    0.341982] Advanced Linux Sound Architecture Driver Initialized.
  101. [    0.343087] NetLabel: Initializing
  102. [    0.343100] NetLabel:  domain hash size = 128
  103. [    0.343106] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
  104. [    0.343214] NetLabel:  unlabeled traffic allowed by default
  105. [    0.344392] clocksource: Switched to clocksource timer1
  106. [    0.559206] VFS: Disk quotas dquot_6.6.0
  107. [    0.559332] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  108. [    0.560890] AppArmor: AppArmor Filesystem Enabled
  109. [    0.577556] NET: Registered protocol family 2
  110. [    0.579035] tcp_listen_portaddr_hash hash table entries: 256 (order: 1, 8192 bytes)
  111. [    0.579082] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  112. [    0.579144] TCP bind hash table entries: 4096 (order: 4, 114688 bytes)
  113. [    0.579335] TCP: Hash tables configured (established 4096 bind 4096)
  114. [    0.579494] UDP hash table entries: 256 (order: 2, 16384 bytes)
  115. [    0.579540] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
  116. [    0.579879] NET: Registered protocol family 1
  117. [    0.593423] RPC: Registered named UNIX socket transport module.
  118. [    0.593437] RPC: Registered udp transport module.
  119. [    0.593443] RPC: Registered tcp transport module.
  120. [    0.593449] RPC: Registered tcp NFSv4.1 backchannel transport module.
  121. [    0.594312] Unpacking initramfs...
  122. [    1.018804] Freeing initrd memory: 6908K
  123. [    1.019746] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
  124. [    1.023596] Initialise system trusted keyrings
  125. [    1.024071] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  126. [    1.035478] zbud: loaded
  127. [    1.044099] NFS: Registering the id_resolver key type
  128. [    1.044152] Key type id_resolver registered
  129. [    1.044161] Key type id_legacy registered
  130. [    1.044184] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  131. [    1.044756] fuse init (API version 7.27)
  132. [    1.058205] Key type asymmetric registered
  133. [    1.058223] Asymmetric key parser 'x509' registered
  134. [    1.058336] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  135. [    1.062736] io scheduler noop registered
  136. [    1.062748] io scheduler deadline registered
  137. [    1.063296] io scheduler cfq registered (default)
  138. [    1.063310] io scheduler mq-deadline registered
  139. [    1.066908] pinctrl-single 44e10800.pinmux: 142 pins, size 568
  140. [    1.083462] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  141. [    1.088309] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 38, base_baud = 3000000) is a 8250
  142. [    1.098533] console [ttyS0] enabled
  143. [    1.099951] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 39, base_baud = 3000000) is a 8250
  144. [    1.101426] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 40, base_baud = 3000000) is a 8250
  145. [    1.102826] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 41, base_baud = 3000000) is a 8250
  146. [    1.104034] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 42, base_baud = 3000000) is a 8250
  147. [    1.105666] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 43, base_baud = 3000000) is a 8250
  148. [    1.109820] omap_rng 48310000.rng: Random Number Generator ver. 20
  149. [    1.110798] sdhci: Secure Digital Host Controller Interface driver
  150. [    1.110809] sdhci: Copyright(c) Pierre Ossman
  151. [    1.111403] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)
  152. [    1.111416] omap_hsmmc 48060000.mmc: Got CD GPIO
  153. [    1.112200] random: fast init done
  154. [    1.112810] random: crng init done
  155. [    1.113792] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1
  156. [    1.142115] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1
  157. [    1.167742] omap_hsmmc 47810000.mmc: Linked as a consumer to regulator.2
  158. [    1.201677] mmc0: host does not support reading read-only switch, assuming write-enable
  159. [    1.204753] mmc0: new high speed SDHC card at address aaaa
  160. [    1.210374] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  161. [    1.215398] mmc1: new high speed MMC card at address 0001
  162. [    1.220602]  mmcblk0: p1
  163. [    1.221928] mmcblk1: mmc1:0001 S10004 3.56 GiB
  164. [    1.222693] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB
  165. [    1.223454] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB
  166. [    1.225520] mmcblk1rpmb: mmc1:0001 S10004 partition 3 4.00 MiB, chardev (245:0)
  167. [    1.268977] sdhci-pltfm: SDHCI platform and OF driver helper
  168. [    1.278719] omap_hsmmc 47810000.mmc: card claims to support voltages below defined range
  169. [    1.279184] eqep 48300180.eqep: ver. 1.0
  170. [    1.280018] eqep 48300180.eqep: count_mode:0
  171. [    1.280034] eqep 48300180.eqep: invert_qa:1
  172. [    1.280044] eqep 48300180.eqep: invert_qb:1
  173. [    1.280053] eqep 48300180.eqep: invert_qi:0
  174. [    1.280063] eqep 48300180.eqep: invert_qs:0
  175. [    1.280073] eqep 48300180.eqep: swap_inputs:0
  176. [    1.280083] eqep 48300180.eqep: QDECCTL:0x0180
  177. [    1.280093] eqep 48300180.eqep: QPOSINIT:0x00000000
  178. [    1.280101] eqep 48300180.eqep: QPOSMAX:0xffffffff
  179. [    1.280110] eqep 48300180.eqep: QPOSCNT:0x00000000
  180. [    1.280119] eqep 48300180.eqep: omit_interrupt:0
  181. [    1.280127] eqep 48300180.eqep: QEINT:0x0800
  182. [    1.280136] eqep 48300180.eqep: QUPRD:0x05f5e100
  183. [    1.280144] eqep 48300180.eqep: QEPCTL:0x009e write
  184. [    1.280153] eqep 48300180.eqep: QEPCTL:0x009e read
  185. [    1.280268] eqep 48300180.eqep: irq:68, clk_rate:100000000
  186. [    1.280913] eqep 48302180.eqep: ver. 1.0
  187. [    1.281630] eqep 48302180.eqep: count_mode:0
  188. [    1.281644] eqep 48302180.eqep: invert_qa:1
  189. [    1.281653] eqep 48302180.eqep: invert_qb:1
  190. [    1.281662] eqep 48302180.eqep: invert_qi:0
  191. [    1.281671] eqep 48302180.eqep: invert_qs:0
  192. [    1.281681] eqep 48302180.eqep: swap_inputs:0
  193. [    1.281690] eqep 48302180.eqep: QDECCTL:0x0180
  194. [    1.281699] eqep 48302180.eqep: QPOSINIT:0x00000000
  195. [    1.281707] eqep 48302180.eqep: QPOSMAX:0xffffffff
  196. [    1.281715] eqep 48302180.eqep: QPOSCNT:0x00000000
  197. [    1.281724] eqep 48302180.eqep: omit_interrupt:0
  198. [    1.281805] eqep 48302180.eqep: QEINT:0x0800
  199. [    1.281815] eqep 48302180.eqep: QUPRD:0x05f5e100
  200. [    1.281823] eqep 48302180.eqep: QEPCTL:0x009e write
  201. [    1.281831] eqep 48302180.eqep: QEPCTL:0x009e read
  202. [    1.281862] eqep 48302180.eqep: irq:70, clk_rate:100000000
  203. [    1.282311] eqep 48304180.eqep: ver. 1.0
  204. [    1.282975] eqep 48304180.eqep: count_mode:0
  205. [    1.282987] eqep 48304180.eqep: invert_qa:1
  206. [    1.282996] eqep 48304180.eqep: invert_qb:1
  207. [    1.283005] eqep 48304180.eqep: invert_qi:0
  208. [    1.283014] eqep 48304180.eqep: invert_qs:0
  209. [    1.283023] eqep 48304180.eqep: swap_inputs:0
  210. [    1.283033] eqep 48304180.eqep: QDECCTL:0x0180
  211. [    1.283041] eqep 48304180.eqep: QPOSINIT:0x00000000
  212. [    1.283049] eqep 48304180.eqep: QPOSMAX:0xffffffff
  213. [    1.283057] eqep 48304180.eqep: QPOSCNT:0x00000000
  214. [    1.283066] eqep 48304180.eqep: omit_interrupt:0
  215. [    1.283075] eqep 48304180.eqep: QEINT:0x0800
  216. [    1.283082] eqep 48304180.eqep: QUPRD:0x05f5e100
  217. [    1.283090] eqep 48304180.eqep: QEPCTL:0x009e write
  218. [    1.283098] eqep 48304180.eqep: QEPCTL:0x009e read
  219. [    1.283127] eqep 48304180.eqep: irq:72, clk_rate:100000000
  220. [    1.295083] mmc2: new high speed SDIO card at address 0001
  221. [    1.308902] libphy: Fixed MDIO Bus: probed
  222. [    1.310183] CAN device driver interface
  223. [    1.312025] c_can_platform 481d0000.can: c_can_platform device registered (regs=4cefdc28, irq=51)
  224. [    1.314157] usbcore: registered new interface driver smsc95xx
  225. [    1.315750] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  226. [    1.315823] ehci-platform: EHCI generic platform driver
  227. [    1.316172] ehci-omap: OMAP-EHCI Host Controller driver
  228. [    1.317307] usbcore: registered new interface driver usb-storage
  229. [    1.321100] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
  230. [    1.321302] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to regulator.0
  231. [    1.325075] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
  232. [    1.325329] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to regulator.0
  233. [    1.329645] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
  234. [    1.329698] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
  235. [    1.330102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  236. [    1.330116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  237. [    1.330125] usb usb1: Product: MUSB HDRC host driver
  238. [    1.330133] usb usb1: Manufacturer: Linux 4.19.94-ti-rt-r64 musb-hcd
  239. [    1.330141] usb usb1: SerialNumber: musb-hdrc.1
  240. [    1.331239] hub 1-0:1.0: USB hub found
  241. [    1.331318] hub 1-0:1.0: 1 port detected
  242. [    1.348655] omap_rtc 44e3e000.rtc: registered as rtc0
  243. [    1.350391] i2c /dev entries driver
  244. [    1.354383] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  245. [    1.355058] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
  246. [    1.361849] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  247. [    1.362245] omap-aes 53500000.aes: will run requests pump with realtime priority
  248. [    1.365928] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  249. [    1.370535] hidraw: raw HID events driver (C) Jiri Kosina
  250. [    1.378611] gnss: GNSS driver registered with major 242
  251. [    1.386807] NET: Registered protocol family 10
  252. [    1.468024] Segment Routing with IPv6
  253. [    1.468174] mip6: Mobile IPv6
  254. [    1.468347] NET: Registered protocol family 17
  255. [    1.468701] can: controller area network core (rev 20170425 abi 9)
  256. [    1.468880] NET: Registered protocol family 29
  257. [    1.469001] 8021q: 802.1Q VLAN Support v1.8
  258. [    1.469110] Key type dns_resolver registered
  259. [    1.469117] mpls_gso: MPLS GSO support
  260. [    1.469429] ThumbEE CPU extension supported.
  261. [    1.469451] Registering SWP/SWPB emulation handler
  262. [    1.469463] omap_voltage_late_init: Voltage driver support not added
  263. [    1.478202] registered taskstats version 1
  264. [    1.478214] Loading compiled-in X.509 certificates
  265. [    1.478384] zswap: loaded using pool lzo/zbud
  266. [    1.482579] Btrfs loaded, crc32c=crc32c-generic
  267. [    1.482724] AppArmor: AppArmor sha1 policy hashing enabled
  268. [    1.547035] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set
  269. [    1.547982] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
  270. [    1.549261] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  271. [    1.550286] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
  272. [    1.550422] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  273. [    1.552813] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
  274. [    1.554847] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz
  275. [    1.560566] cpu cpu0: Linked as a consumer to regulator.4
  276. [    1.560726] cpu cpu0: Dropping the link to regulator.4
  277. [    1.561322] cpu cpu0: Linked as a consumer to regulator.4
  278. [    1.563897] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
  279. [    1.565556] ALSA device list:
  280. [    1.565568]   No soundcards found.
  281. [    1.573415] Freeing unused kernel memory: 1024K
  282. [    1.574157] Run /init as init process
  283. [    9.179575] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
  284. [   10.059170] systemd[1]: System time before build time, advancing clock.
  285. [   10.120187] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  286. [   10.121486] systemd[1]: Detected architecture arm.
  287. [   10.149567] systemd[1]: Set hostname to <beaglebone>.
  288. [   11.743055] systemd[1]: /lib/systemd/system/rc_battery_monitor.service:5: PIDFile= references path below legacy directory /var/run/, updating /var/run/rc_battery_monitor.pid → /run/rc_battery_monitor.pid; please update the unit file accordingly.
  289. [   11.892800] systemd[1]: Listening on udev Control Socket.
  290. [   11.899366] systemd[1]: Created slice User and Session Slice.
  291. [   11.899558] systemd[1]: Reached target Slices.
  292. [   11.899674] systemd[1]: Reached target Remote File Systems.
  293. [   11.905540] systemd[1]: Created slice system-getty.slice.
  294. [   11.907261] systemd[1]: Listening on Journal Socket.
  295. [   12.923115] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
  296. [   14.369688] systemd-journald[700]: Received request to flush runtime journal from PID 1
  297. [   22.317623] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f62000
  298. [   22.317641] pgd = 128024c5
  299. [   22.317646] [b6f62000] *pgd=9c61e831, *pte=4a324143, *ppte=4a324832
  300. [   26.505466] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6efe000
  301. [   26.505483] pgd = 439bc215
  302. [   26.505489] [b6efe000] *pgd=9c646831, *pte=4a324143, *ppte=4a324832
  303. [   27.949002] using random self ethernet address
  304. [   28.011076] using random host ethernet address
  305. [   28.406585] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fc6000
  306. [   28.406603] pgd = 4ad37859
  307. [   28.406608] [b6fc6000] *pgd=9b4f7831, *pte=4a324143, *ppte=4a324832
  308. [   28.770459] Mass Storage Function, version: 2009/09/11
  309. [   28.770481] LUN: removable file: (no medium)
  310. [   29.212324] using random self ethernet address
  311. [   29.212345] using random host ethernet address
  312. [   29.484996] usb0: HOST MAC f4:5e:ab:50:c4:c5
  313. [   29.489597] usb0: MAC f4:5e:ab:50:c4:c4
  314. [   29.501099] usb1: HOST MAC f4:5e:ab:50:c4:c7
  315. [   29.503921] usb1: MAC f4:5e:ab:50:c4:c8
  316. [   29.797303] configfs-gadget gadget: high-speed config #1: c
  317. [   29.816013] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  318. [   30.496742] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
  319. [   30.531716] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
  320. [   30.991208] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f83000
  321. [   30.991226] pgd = 81abf960
  322. [   30.991231] [b6f83000] *pgd=99b1a831, *pte=4a324143, *ppte=4a324832
  323. [   31.712671] wlan-en-regulator: disabling
  324. [   33.035250] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f00000
  325. [   33.035268] pgd = 35e315bf
  326. [   33.035273] [b6f00000] *pgd=99bad831, *pte=4a324143, *ppte=4a324832
  327. [   35.171135] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f33000
  328. [   35.171153] pgd = 38dd9881
  329. [   35.171158] [b6f33000] *pgd=99b38831, *pte=4a324143, *ppte=4a324832
  330. [   37.365652] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fe9000
  331. [   37.365670] pgd = c32c0070
  332. [   37.365675] [b6fe9000] *pgd=99a90831, *pte=4a324143, *ppte=4a324832
  333. [   39.192293] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f5b000
  334. [   39.192312] pgd = b5a7489d
  335. [   39.192317] [b6f5b000] *pgd=9b0a6831, *pte=4a324143, *ppte=4a324832
  336. [   41.245083] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fa1000
  337. [   41.245101] pgd = c50de2d0
  338. [   41.245106] [b6fa1000] *pgd=9b08a831, *pte=4a324143, *ppte=4a324832
  339. [   43.125217] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6ef7000
  340. [   43.125235] pgd = aeedd4e9
  341. [   43.125240] [b6ef7000] *pgd=9b0b6831, *pte=4a324143, *ppte=4a324832
  342. [   45.109318] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f1b000
  343. [   45.109336] pgd = 3260c723
  344. [   45.109340] [b6f1b000] *pgd=99b4d831, *pte=4a324143, *ppte=4a324832
  345. [   47.155949] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f44000
  346. [   47.155967] pgd = 1610ab9e
  347. [   47.155971] [b6f44000] *pgd=9b0a1831, *pte=4a324143, *ppte=4a324832
  348. [   49.513719] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fce000
  349. [   49.513738] pgd = 81edb38c
  350. [   49.513743] [b6fce000] *pgd=9b50a831, *pte=4a324143, *ppte=4a324832
  351. [   51.240061] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f3d000
  352. [   51.240078] pgd = 81edb38c
  353. [   51.240083] [b6f3d000] *pgd=9b08b831, *pte=4a324143, *ppte=4a324832
  354. [   53.133138] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f72000
  355. [   53.133155] pgd = c9641cee
  356. [   53.133160] [b6f72000] *pgd=9b0ac831, *pte=4a324143, *ppte=4a324832
  357. [   55.312597] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fa0000
  358. [   55.312614] pgd = 0a980bcd
  359. [   55.312619] [b6fa0000] *pgd=9b06e831, *pte=4a324143, *ppte=4a324832
  360. [   58.163206] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6efa000
  361. [   58.163224] pgd = c85aa6b7
  362. [   58.163229] [b6efa000] *pgd=9c72b831, *pte=4a324143, *ppte=4a324832
  363. [   60.747909] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fc8000
  364. [   60.747927] pgd = b42d3174
  365. [   60.747932] [b6fc8000] *pgd=99b2a831, *pte=4a324143, *ppte=4a324832
  366. [   62.954227] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6fb3000
  367. [   62.954246] pgd = fe412bd7
  368. [   62.954251] [b6fb3000] *pgd=9b1aa831, *pte=4a324143, *ppte=4a324832
  369. [   65.273787] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f47000
  370. [   65.273805] pgd = 6a37a536
  371. [   65.273810] [b6f47000] *pgd=9b179831, *pte=4a324143, *ppte=4a324832
  372. [   67.056906] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f6b000
  373. [   67.056923] pgd = c50de2d0
  374. [   67.056928] [b6f6b000] *pgd=9c7e9831, *pte=4a324143, *ppte=4a324832
  375. [   68.652314] Unhandled fault: external abort on non-linefetch (0x1818) at 0xb6f1b000
  376. [   68.652332] pgd = b42d3174
  377. [   68.652337] [b6f1b000] *pgd=9b073831, *pte=4a324143, *ppte=4a324832
  378. [   69.858273] pvrsrvkm: loading out-of-tree module taints kernel.
  379. [   74.977675] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.sgx on minor 0
  380. [   92.704951] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
  381. [   93.439697] PM: Cannot get wkup_m3_ipc handle
  382. [   94.390120] remoteproc remoteproc0: wkup_m3 is available
  383. [   94.458906] PM: Cannot get wkup_m3_ipc handle
  384. [   94.464726] remoteproc remoteproc0: powering up wkup_m3
  385. [   94.464758] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
  386. [   94.484761] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
  387. [   94.486243] remoteproc remoteproc0: remote processor wkup_m3 is now up
  388. [  110.296236] Bluetooth: Core ver 2.22
  389. [  110.307385] NET: Registered protocol family 31
  390. [  110.307406] Bluetooth: HCI device and connection manager initialized
  391. [  110.307448] Bluetooth: HCI socket layer initialized
  392. [  110.307468] Bluetooth: L2CAP socket layer initialized
  393. [  110.307568] Bluetooth: SCO socket layer initialized
  394. [  110.509566] Bluetooth: HCI UART driver ver 2.3
  395. [  110.512079] Bluetooth: HCI UART protocol H4 registered
  396. [  110.526890] Bluetooth: HCI UART protocol LL registered
  397. [  110.526910] Bluetooth: HCI UART protocol ATH3K registered
  398. [  110.527496] Bluetooth: HCI UART protocol Three-wire (H5) registered
  399. [  132.879437] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  400. [  132.879707] Bluetooth: BNEP filters: protocol multicast
  401. [  132.879751] Bluetooth: BNEP socket layer initialized
  402. [  136.678374] Bluetooth: RFCOMM TTY layer initialized
  403. [  136.678432] Bluetooth: RFCOMM socket layer initialized
  404. [  136.678500] Bluetooth: RFCOMM ver 1.11
  405. [  137.316218] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  406. [  137.646945] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  407. [  150.394879] PM: bootloader does not support rtc-only!
  408. [  150.966126] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
  409. [  151.204792] wlcore: loaded
  410. [  152.506677] wlcore: PHY firmware version: Rev 8.2.0.0.245
  411. [  152.866764] wlcore: firmware booted (Rev 8.9.0.0.88)
  412. [  153.070885] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  413. [  157.688670] wlan0: authenticate with 0c:80:63:fd:40:4c
  414. [  157.787410] wlan0: send auth to 0c:80:63:fd:40:4c (try 1/3)
  415. [  157.810152] wlan0: authenticated
  416. [  157.897336] wlan0: associate with 0c:80:63:fd:40:4c (try 1/3)
  417. [  157.912649] wlan0: RX AssocResp from 0c:80:63:fd:40:4c (capab=0x411 status=0 aid=2)
  418. [  158.029542] wlan0: associated
  419. [  158.446211] IPv6: ADDRCONF(NETDEV_UP): SoftAp0: link is not ready
  420. [  160.280787] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  421. [  160.435235] wlcore: Association completed.
  422. [  175.951357] wlcore: down
  423. [  177.062030] IPv6: ADDRCONF(NETDEV_CHANGE): SoftAp0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!