➜  windows git:(master) ✗ vagrant ssh
VM must be running to open SSH connection. Run `vagrant up`
to start the virtual machine.
➜  windows git:(master) ✗ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Clearing any previously set forwarded ports...
==> default: Fixed port collision for 22 => 2222. Now on port 2203.
==> default: Clearing any previously set network interfaces...
==> default: Specific bridge '["br1", "eth0"]' not found. You may be asked to specify
==> default: which network to bridge to.
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: bridged
==> default: Forwarding ports...
    default: 5985 (guest) => 55985 (host) (adapter 1)
    default: 5986 (guest) => 55986 (host) (adapter 1)
    default: 22 (guest) => 2203 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: WinRM address: 127.0.0.1:55985
    default: WinRM username: tc
    default: WinRM execution_time_limit: PT2H
    default: WinRM transport: plaintext
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
    default: /vagrant => /home/me/Documents/autoqa/vagrant/windows
==> default: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always will still run.
➜  windows git:(master) ✗ vagrant ssh
ssh_exchange_identification: read: Connection reset by peer
➜  windows git:(master) ✗ vagrant ssh
ssh_exchange_identification: read: Connection reset by peer
➜  windows git:(master) ✗ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always will still run.
➜  windows git:(master) ✗ vagrant reload
==> default: Attempting graceful shutdown of VM...
==> default: Clearing any previously set forwarded ports...
==> default: Fixed port collision for 22 => 2222. Now on port 2203.
==> default: Clearing any previously set network interfaces...
==> default: Specific bridge '["br1", "eth0"]' not found. You may be asked to specify
==> default: which network to bridge to.
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: bridged
==> default: Forwarding ports...
    default: 5985 (guest) => 55985 (host) (adapter 1)
    default: 5986 (guest) => 55986 (host) (adapter 1)
    default: 22 (guest) => 2203 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: WinRM address: 127.0.0.1:55985
    default: WinRM username: tc
    default: WinRM execution_time_limit: PT2H
    default: WinRM transport: plaintext
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
    default: /vagrant => /home/me/Documents/autoqa/vagrant/windows
==> default: Machine already provisioned. Run `vagrant provision` or use the `--provision`
==> default: flag to force provisioning. Provisioners marked to run always will still run.
➜  windows git:(master) ✗ vagrant ssh
ssh_exchange_identification: read: Connection reset by peer
➜  windows git:(master) ✗ vagrant ssh
ssh_exchange_identification: read: Connection reset by peer
➜  windows git:(master) ✗ vagrant destroy
    default: Are you sure you want to destroy the 'default' VM? [y/N] y
==> default: Forcing shutdown of VM...
==> default: Destroying VM and associated drives...
➜  windows git:(master) ✗ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Box 'autoqa/windows_x64' could not be found. Attempting to find and install...
    default: Box Provider: virtualbox
    default: Box Version: >= 0
==> default: Loading metadata for box 'http://172.16.2.156/vagrant_boxes/windows/version.json'
    default: URL: http://172.16.2.156/vagrant_boxes/windows/version.json
==> default: Adding box 'autoqa/windows_x64' (v10.0.1) for provider: virtualbox
    default: Downloading: http://172.16.2.156/vagrant_boxes/windows/windows10_x64_10.0.1.box
    default: Calculating and comparing box checksum...
==> default: Successfully added box 'autoqa/windows_x64' (v10.0.1) for 'virtualbox'!
==> default: Preparing master VM for linked clones...
    default: This is a one time operation. Once the master VM is prepared,
    default: it will be used as a base for linked clones, making the creation
    default: of new VMs take milliseconds on a modern system.
==> default: Importing base box 'autoqa/windows_x64'...
==> default: Cloning VM...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'autoqa/windows_x64' is up to date...
==> default: Setting the name of the VM: windows_default_1520415032420_62968
==> default: Fixed port collision for 22 => 2222. Now on port 2203.
==> default: Clearing any previously set network interfaces...
==> default: Specific bridge '["br1", "eth0"]' not found. You may be asked to specify
==> default: which network to bridge to.
==> default: Preparing network interfaces based on configuration...
    default: Adapter 1: nat
    default: Adapter 2: bridged
==> default: Forwarding ports...
    default: 5985 (guest) => 55985 (host) (adapter 1)
    default: 5986 (guest) => 55986 (host) (adapter 1)
    default: 22 (guest) => 2203 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
    default: WinRM address: 127.0.0.1:55985
    default: WinRM username: tc
    default: WinRM execution_time_limit: PT2H
    default: WinRM transport: plaintext
Timed out while waiting for the machine to boot. This means that
Vagrant was unable to communicate with the guest machine within
the configured ("config.vm.boot_timeout" value) time period.

If you look above, you should be able to see the error(s) that
Vagrant had when attempting to connect to the machine. These errors
are usually good hints as to what may be wrong.

If you're using a custom box, make sure that networking is properly
working and you're able to connect to the machine. It is a common
problem that networking isn't setup properly in these boxes.
Verify that authentication configurations are also setup properly,
as well.

If the box appears to be booting properly, you may want to increase
the timeout ("config.vm.boot_timeout") value.
➜  windows git:(master) ✗ vagrant ssh
^C%                                                                                                                                                        ➜  windows git:(master) ✗
➜  windows git:(master) ✗
➜  windows git:(master) ✗
➜  windows git:(master) ✗ vagrant destroy
   default: Are you sure you want to destroy the 'default' VM? [y/N] y
==> default: Forcing shutdown of VM...
==> default: Destroying VM and associated drives...
➜  windows git:(master) ✗ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Cloning VM...
==> default: Matching MAC address for NAT networking...
==> default: Checking if box 'autoqa/windows_x64' is up to date...
==> default: Setting the name of the VM: windows_default_1520415749435_93104
==> default: Fixed port collision for 22 => 2222. Now on port 2203.
==> default: Clearing any previously set network interfaces...
==> default: Specific bridge '["br1", "eth0"]' not found. You may be asked to specify
==> default: which network to bridge to.
==> default: Preparing network interfaces based on configuration...
   default: Adapter 1: nat
   default: Adapter 2: bridged
==> default: Forwarding ports...
   default: 5985 (guest) => 55985 (host) (adapter 1)
   default: 5986 (guest) => 55986 (host) (adapter 1)
   default: 22 (guest) => 2203 (host) (adapter 1)
==> default: Running 'pre-boot' VM customizations...
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
   default: WinRM address: 127.0.0.1:55985
   default: WinRM username: tc
   default: WinRM execution_time_limit: PT2H
   default: WinRM transport: plaintext