API tools faq
paste
Advertisement
abmelnikov

dmesq

abmelnikov
Feb 19th, 2025
143
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 19.60 KB | None | 0 0
raw download clone embed print report
  1. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [    0.000000] Linux version 6.6.73 (qauser@amelnikov-clean302) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 13.3.0 r28427-6df0e3d02a) 13.3.0, GNU ld (GNU Binutils) 2.42) #0 SMP Mon Feb  3 23:09:37 2025
  3. [    0.000000] Machine model: Cudy TR3000 v1
  4. [    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
  5. [    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
  6. [    0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 KiB) nomap non-reusable wmcpu-reserved@47c80000
  7. [    0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 KiB) nomap non-reusable wo-emi@47d80000
  8. [    0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 KiB) nomap non-reusable wo-data@47dc0000
  9. [    0.000000] Zone ranges:
  10. [    0.000000]   DMA      [mem 0x0000000040000000-0x000000005fffffff]
  11. [    0.000000]   DMA32    empty
  12. [    0.000000]   Normal   empty
  13. [    0.000000] Movable zone start for each node
  14. [    0.000000] Early memory node ranges
  15. [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
  16. [    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]
  17. [    0.000000]   node   0: [mem 0x0000000043030000-0x0000000047c7ffff]
  18. [    0.000000]   node   0: [mem 0x0000000047c80000-0x0000000047ffffff]
  19. [    0.000000]   node   0: [mem 0x0000000048000000-0x000000005fffffff]
  20. [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
  21. [    0.000000] psci: probing for conduit method from DT.
  22. [    0.000000] psci: PSCIv1.1 detected in firmware.
  23. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  24. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  25. [    0.000000] psci: SMC Calling Convention v1.4
  26. [    0.000000] percpu: Embedded 18 pages/cpu s35048 r8192 d30488 u73728
  27. [    0.000000] pcpu-alloc: s35048 r8192 d30488 u73728 alloc=18*4096
  28. [    0.000000] pcpu-alloc: [0] 0 [0] 1
  29. [    0.000000] Detected VIPT I-cache on CPU0
  30. [    0.000000] CPU features: detected: GIC system register CPU interface
  31. [    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
  32. [    0.000000] alternatives: applying boot alternatives
  33. [    0.000000] Kernel command line:
  34. [    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  35. [    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  36. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129024
  37. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  38. [    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB
  39. [    0.000000] software IO TLB: area num 2.
  40. [    0.000000] software IO TLB: mapped [mem 0x000000005fd68000-0x000000005fde8000] (0MB)
  41. [    0.000000] Memory: 496336K/524288K available (8832K kernel code, 994K rwdata, 2568K rodata, 448K init, 289K bss, 27952K reserved, 0K cma-reserved)
  42. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  43. [    0.000000] rcu: Hierarchical RCU implementation.
  44. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  45. [    0.000000]  Tracing variant of Tasks RCU enabled.
  46. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  47. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  48. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  49. [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  50. [    0.000000] GICv3: 640 SPIs implemented
  51. [    0.000000] GICv3: 0 Extended SPIs implemented
  52. [    0.000000] Root IRQ handler: gic_handle_irq
  53. [    0.000000] GICv3: GICv3 features: 16 PPIs
  54. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
  55. [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  56. [    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
  57. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
  58. [    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
  59. [    0.000069] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
  60. [    0.000077] pid_max: default: 32768 minimum: 301
  61. [    0.002967] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  62. [    0.002975] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  63. [    0.005095] cacheinfo: Unable to detect cache hierarchy for CPU 0
  64. [    0.005625] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2.
  65. [    0.005779] rcu: Hierarchical SRCU implementation.
  66. [    0.005782] rcu:     Max phase no-delay instances is 1000.
  67. [    0.006160] smp: Bringing up secondary CPUs ...
  68. [    0.006530] Detected VIPT I-cache on CPU1
  69. [    0.006573] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
  70. [    0.006602] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  71. [    0.006669] smp: Brought up 1 node, 2 CPUs
  72. [    0.006674] SMP: Total of 2 processors activated.
  73. [    0.006678] CPU features: detected: 32-bit EL0 Support
  74. [    0.006681] CPU features: detected: CRC32 instructions
  75. [    0.006712] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  76. [    0.006716] CPU: All CPU(s) started at EL2
  77. [    0.006718] alternatives: applying system-wide alternatives
  78. [    0.010191] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  79. [    0.010207] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  80. [    0.011484] pinctrl core: initialized pinctrl subsystem
  81. [    0.012628] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  82. [    0.012931] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  83. [    0.012955] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  84. [    0.012977] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  85. [    0.013357] thermal_sys: Registered thermal governor 'fair_share'
  86. [    0.013361] thermal_sys: Registered thermal governor 'bang_bang'
  87. [    0.013363] thermal_sys: Registered thermal governor 'step_wise'
  88. [    0.013365] thermal_sys: Registered thermal governor 'user_space'
  89. [    0.013402] ASID allocator initialised with 65536 entries
  90. [    0.014109] pstore: Using crash dump compression: deflate
  91. [    0.014114] pstore: Registered ramoops as persistent store backend
  92. [    0.014116] ramoops: using 0x10000@0x42ff0000, ecc: 0
  93. [    0.015522] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
  94. [    0.021251] Modules: 29440 pages in range for non-PLT usage
  95. [    0.021259] Modules: 520960 pages in range for PLT usage
  96. [    0.022307] cryptd: max_cpu_qlen set to 1000
  97. [    0.024361] SCSI subsystem initialized
  98. [    0.024986] libata version 3.00 loaded.
  99. [    0.026427] clocksource: Switched to clocksource arch_sys_counter
  100. [    0.028739] NET: Registered PF_INET protocol family
  101. [    0.028850] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
  102. [    0.030128] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
  103. [    0.030143] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  104. [    0.030155] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
  105. [    0.030185] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
  106. [    0.030278] TCP: Hash tables configured (established 4096 bind 4096)
  107. [    0.030592] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
  108. [    0.030703] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  109. [    0.030719] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  110. [    0.030907] NET: Registered PF_UNIX/PF_LOCAL protocol family
  111. [    0.030930] PCI: CLS 0 bytes, default 64
  112. [    0.032244] workingset: timestamp_bits=46 max_order=17 bucket_order=0
  113. [    0.036976] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  114. [    0.036985] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  115. [    0.080836] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  116. [    0.082090] printk: console [ttyS0] disabled
  117. [    0.102450] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud = 2500000) is a ST16650V2
  118. [    0.102490] printk: console [ttyS0] enabled
  119. [    0.851253] loop: module loaded
  120. [    0.857225] spi-nand spi0.0: calibration result: 0x3
  121. [    0.862277] spi-nand spi0.0: ESMT SPI NAND was found.
  122. [    0.867348] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
  123. [    0.875809] Signature found at block 1023 [0x07fe0000]
  124. [    0.880962] NMBM management region starts at block 960 [0x07800000]
  125. [    0.888188] First info table with writecount 0 found in block 960
  126. [    0.897073] Second info table with writecount 0 found in block 963
  127. [    0.903252] NMBM has been successfully attached
  128. [    0.908099] 6 fixed-partitions partitions found on MTD device spi0.0
  129. [    0.914681] Creating 6 MTD partitions on "spi0.0":
  130. [    0.919495] 0x000000000000-0x000000100000 : "BL2"
  131. [    0.925166] 0x000000100000-0x000000180000 : "u-boot-env"
  132. [    0.931163] 0x000000180000-0x000000380000 : "Factory"
  133. [    0.937948] 0x000000380000-0x0000003c0000 : "bdinfo"
  134. [    0.943722] 0x0000003c0000-0x0000005c0000 : "FIP"
  135. [    0.949975] 0x0000005c0000-0x0000075c0000 : "ubi"
  136. [    1.008130] ubi0: default fastmap pool size: 40
  137. [    1.012666] ubi0: default fastmap WL pool size: 20
  138. [    1.017483] ubi0: attaching mtd5
  139. [    1.402923] ubi0: scanning is finished
  140. [    1.412080] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 17, need 19
  141. [    1.422688] ubi0: attached mtd5 (name "ubi", size 112 MiB)
  142. [    1.428196] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  143. [    1.435061] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  144. [    1.441844] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  145. [    1.448797] ubi0: good PEBs: 896, bad PEBs: 0, corrupted PEBs: 0
  146. [    1.454790] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
  147. [    1.462001] ubi0: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 0
  148. [    1.470341] ubi0: available PEBs: 0, total reserved PEBs: 896, PEBs reserved for bad PEB handling: 17
  149. [    1.479560] ubi0: background thread "ubi_bgt0d" started, PID 184
  150. [    1.480250] block ubiblock0_1: created from ubi0:1(rootfs)
  151. [    1.491049] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
  152. [    1.999597] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081600000, irq 75
  153. [    2.009431] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc081600000, irq 75
  154. [    2.019173] i2c_dev: i2c /dev entries driver
  155. [    2.025175] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
  156. [    2.034004] NET: Registered PF_INET6 protocol family
  157. [    2.039799] Segment Routing with IPv6
  158. [    2.043476] In-situ OAM (IOAM) with IPv6
  159. [    2.047469] NET: Registered PF_PACKET protocol family
  160. [    2.052668] 8021q: 802.1Q VLAN Support v1.8
  161. [    2.081154] phy phy-soc:usb-phy@11e10000.1: type_sw - reg 0x218, index 0
  162. [    2.088820] clk: Disabling unused clocks
  163. [    2.097582] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  164. [    2.104899] Freeing unused kernel memory: 448K
  165. [    2.109561] Run /sbin/init as init process
  166. [    2.113650]   with arguments:
  167. [    2.116615]     /sbin/init
  168. [    2.119310]   with environment:
  169. [    2.122437]     HOME=/
  170. [    2.124784]     TERM=linux
  171. [    2.324940] init: Console is alive
  172. [    2.328578] init: - watchdog -
  173. [    2.916469] random: crng init done
  174. [    2.928077] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  175. [    2.995862] usbcore: registered new interface driver usbfs
  176. [    3.001417] usbcore: registered new interface driver hub
  177. [    3.006777] usbcore: registered new device driver usb
  178. [    3.012518] gpio_button_hotplug: loading out-of-tree module taints kernel.
  179. [    3.032408] xhci-mtk 11200000.usb: xHCI Host Controller
  180. [    3.037737] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
  181. [    3.048123] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
  182. [    3.057419] xhci-mtk 11200000.usb: irq 79, io mem 0x11200000
  183. [    3.063164] xhci-mtk 11200000.usb: xHCI Host Controller
  184. [    3.068411] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
  185. [    3.075802] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
  186. [    3.083335] hub 1-0:1.0: USB hub found
  187. [    3.087150] hub 1-0:1.0: 1 port detected
  188. [    3.091425] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  189. [    3.099954] hub 2-0:1.0: USB hub found
  190. [    3.103744] hub 2-0:1.0: 1 port detected
  191. [    3.113555] usbcore: registered new interface driver usb-storage
  192. [    3.119947] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  193. [    3.130121] init: - preinit -
  194. [    3.478449] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:00] driver [MediaTek MT7981 PHY] (irq=POLL)
  195. [    3.491170] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/gmii link mode
  196. [    4.368401] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
  197. [    7.676631] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
  198. [    7.733536] UBIFS (ubi0:2): Mounting in unauthenticated mode
  199. [    7.739313] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 733
  200. [    7.765013] UBIFS (ubi0:2): recovery needed
  201. [    7.888706] UBIFS (ubi0:2): recovery completed
  202. [    7.893215] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  203. [    7.901048] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  204. [    7.910953] UBIFS (ubi0:2): FS size: 93327360 bytes (89 MiB, 735 LEBs), max 746 LEBs, journal size 4698112 bytes (4 MiB, 37 LEBs)
  205. [    7.922593] UBIFS (ubi0:2): reserved for root: 4408081 bytes (4304 KiB)
  206. [    7.929208] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 67E1BBE8-23F1-48D2-86D2-9AF024B5746D, small LPT model
  207. [    7.945166] mount_root: switching to ubifs overlay
  208. [    7.958025] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
  209. [    7.972617] urandom-seed: Seeding with /etc/urandom.seed
  210. [    8.034352] mtk_soc_eth 15100000.ethernet eth1: Link is Down
  211. [    8.047762] procd: - early -
  212. [    8.050704] procd: - watchdog -
  213. [    8.606868] procd: - watchdog -
  214. [    8.611447] procd: - ubus -
  215. [    8.765596] procd: - init -
  216. [    9.178719] kmodloader: loading kernel modules from /etc/modules.d/*
  217. [    9.249802] NET: Registered PF_ALG protocol family
  218. [    9.264189] l2tp_core: L2TP core driver, V2.0
  219. [    9.269622] l2tp_netlink: L2TP netlink interface
  220. [    9.275898] gre: GRE over IPv4 demultiplexor driver
  221. [    9.282184] ip_gre: GRE over IPv4 tunneling driver
  222. [    9.298932] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
  223. [    9.413916] urngd: v1.0.2 started.
  224. [    9.419539] usbcore: registered new interface driver cdc_acm
  225. [    9.425197] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  226. [    9.434950] usbcore: registered new interface driver cdc_wdm
  227. [    9.441855] Loading modules backported from Linux version v6.12.6-0-ge9d65b48ce1a
  228. [    9.449377] Backport generated by backports.git v6.1.110-1-35-g410656ef04d2
  229. [    9.463336] usbcore: registered new interface driver ipheth
  230. [    9.481553] usbcore: registered new device driver r8152-cfgselector
  231. [    9.487959] usbcore: registered new interface driver r8152
  232. [    9.496060] usbcore: registered new interface driver rtl8150
  233. [    9.508592] usbcore: registered new interface driver usbserial_generic
  234. [    9.515191] usbserial: USB Serial support registered for generic
  235. [    9.523078] usbcore: registered new interface driver cdc_ether
  236. [    9.530318] usbcore: registered new interface driver cdc_ncm
  237. [    9.547583] usbcore: registered new interface driver huawei_cdc_ncm
  238. [    9.911159] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20240823161240a
  239.  
  240. [   10.112826] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20240823161304
  241. [   10.206729] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20240823161841
  242. [   10.304402] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0'
  243. [   10.348230] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1'
  244. [   10.420318] PPP generic driver version 2.4.2
  245. [   10.425929] PPP MPPE Compression module registered
  246. [   10.431751] NET: Registered PF_PPPOX protocol family
  247. [   10.437800] PPTP driver version 0.8.5
  248. [   10.451046] mtdblock: MTD device 'bdinfo' is NAND, please consider using UBI block devices instead.
  249. [   10.451217] rndis_host 2-1:1.0 eth2: register 'rndis_host' at usb-11200000.usb-1, RNDIS device, 00:00:11:12:13:14
  250. [   10.470588] usbcore: registered new interface driver rndis_host
  251. [   10.481832] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  252. [   10.489743] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  253. [   10.500748] usbcore: registered new interface driver cdc_mbim
  254. [   10.508055] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  255. [   10.515380] usbcore: registered new interface driver option
  256. [   10.521083] usbserial: USB Serial support registered for GSM modem (1-port)
  257. [   10.528332] option 2-1:1.2: GSM modem (1-port) converter detected
  258. [   10.534678] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
  259. [   10.541774] option 2-1:1.3: GSM modem (1-port) converter detected
  260. [   10.548128] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
  261. [   10.555176] option 2-1:1.4: GSM modem (1-port) converter detected
  262. [   10.561528] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
  263. [   10.568606] option 2-1:1.6: GSM modem (1-port) converter detected
  264. [   10.574935] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
  265. [   10.581851] mtdblock: MTD device 'bdinfo' is NAND, please consider using UBI block devices instead.
  266. [   10.582024] option 2-1:1.7: GSM modem (1-port) converter detected
  267. [   10.597300] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB4
  268. [   10.604338] option 2-1:1.8: GSM modem (1-port) converter detected
  269. [   10.610675] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB5
  270. [   10.617741] option 2-1:1.9: GSM modem (1-port) converter detected
  271. [   10.624095] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB6
  272. [   10.633874] usbcore: registered new interface driver qcserial
  273. [   10.639758] usbserial: USB Serial support registered for Qualcomm USB modem
  274. [   10.647181] kmodloader: done loading kernel modules from /etc/modules.d/*
  275. [   14.790093] mtk_soc_eth 15100000.ethernet eth1: PHY [mdio-bus:00] driver [MediaTek MT7981 PHY] (irq=POLL)
  276. [   14.803255] mtk_soc_eth 15100000.ethernet eth1: configuring for phy/gmii link mode
  277. [   14.811893] br-lan: port 1(eth1) entered blocking state
  278. [   14.817162] br-lan: port 1(eth1) entered disabled state
  279. [   14.822415] mtk_soc_eth 15100000.ethernet eth1: entered allmulticast mode
  280. [   14.829397] mtk_soc_eth 15100000.ethernet eth1: entered promiscuous mode
  281. [   15.096544] mtk_soc_eth 15100000.ethernet eth0: PHY [mdio-bus:01] driver [RTL8221B-VB-CG 2.5Gbps PHY (C45)] (irq=53)
  282. [   15.109588] mtk_soc_eth 15100000.ethernet eth0: configuring for phy/2500base-x link mode
  283. [   18.956631] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
  284. [   18.956658] br-lan: port 1(eth1) entered blocking state
  285. [   18.970295] br-lan: port 1(eth1) entered forwarding state
  286.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!