API tools faq
paste
Advertisement
RobertBerger

poky-1.1-beta-e3c5d7a90ae179a-bb-rev-C4

RobertBerger
Sep 28th, 2011
232
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.94 KB | None | 0 0
raw download clone embed print report
  1. Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
  2. Reading boot sector
  3. Loading u-boot.bin from mmc
  4.  
  5.  
  6. U-Boot 2011.06 (Sep 28 2011 - 02:54:31)
  7.  
  8. OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
  9. OMAP3 Beagle board + LPDDR/NAND
  10. I2C: ready
  11. DRAM: 256 MiB
  12. NAND: 256 MiB
  13. MMC: OMAP SD/MMC: 0
  14. *** Warning - bad CRC, using default environment
  15.  
  16. In: serial
  17. Out: serial
  18. Err: serial
  19. Beagle Rev C4
  20. timed out in wait_for_pin: I2C_STAT=0
  21. I2C read: I/O error
  22. Unrecognized expansion board: 0
  23. Die ID #33240004000000000403951c0800e017
  24. Hit any key to stop autoboot: 0
  25. OMAP3 beagleboard.org # sete console "ttyO2,115200n8"
  26. OMAP3 beagleboard.org # sete sd_boot "mmc rescan ${mmcdev}; run loadbootscript; run bootscript; run loaduimage; run mmcboot;"
  27. OMAP3 beagleboard.org #
  28. OMAP3 beagleboard.org # run sd_boot
  29. ## Error: "loadbootscript" not defined
  30. ## Error: "bootscript" not defined
  31. reading uImage
  32.  
  33. 2809656 bytes read
  34. Booting from mmc ...
  35. ## Booting kernel from Legacy Image at 82000000 ...
  36. Image Name: Linux-2.6.37.6-yocto-standard+
  37. Image Type: ARM Linux Kernel Image (uncompressed)
  38. Data Size: 2809592 Bytes = 2.7 MiB
  39. Load Address: 80008000
  40. Entry Point: 80008000
  41. Verifying Checksum ... OK
  42. Loading Kernel Image ... OK
  43. OK
  44.  
  45. Starting kernel ...
  46.  
  47. Uncompressing Linux... done, booting the kernel.
  48. Initializing cgroup subsys cpuset
  49. Initializing cgroup subsys cpu
  50. Linux version 2.6.37.6-yocto-standard+ (rber@yocto-1) (gcc version 4.6.1 20110627 (prerelease) (GCC) ) #1 PREEMPT Wed Sep 28 01:00:16 EEST 2011
  51. CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  52. CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  53. Machine: OMAP3 Beagle Board
  54. Reserving 12582912 bytes SDRAM for VRAM
  55. Memory policy: ECC disabled, Data cache writeback
  56. OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720mhz )
  57. SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  58. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61952
  59. Kernel command line: console=ttyO2,115200n8 mpurate=auto vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  60. PID hash table entries: 1024 (order: 0, 4096 bytes)
  61. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  62. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  63. allocated 1310720 bytes of page_cgroup
  64. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  65. Memory: 244MB = 244MB total
  66. Memory: 240084k/240084k available, 22060k reserved, 0K highmem
  67. Virtual kernel memory layout:
  68. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  69. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  70. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  71. vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
  72. lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  73. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  74. .init : 0xc0008000 - 0xc0056000 ( 312 kB)
  75. .text : 0xc0056000 - 0xc0573afc (5239 kB)
  76. .data : 0xc0574000 - 0xc05c9700 ( 342 kB)
  77. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  78. Preemptable hierarchical RCU implementation.
  79. NR_IRQS:402
  80. Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
  81. Reprogramming SDRC clock to 332000000 Hz
  82. GPMC revision 5.0
  83. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  84. Total of 96 interrupts on 1 active controller
  85. OMAP clockevent source: GPTIMER12 at 32768 Hz
  86. Console: colour dummy device 80x30
  87. Calibrating delay loop... 481.06 BogoMIPS (lpj=1880064)
  88. pid_max: default: 32768 minimum: 301
  89. Security Framework initialized
  90. Mount-cache hash table entries: 512
  91. Initializing cgroup subsys debug
  92. Initializing cgroup subsys ns
  93. ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
  94. Initializing cgroup subsys cpuacct
  95. Initializing cgroup subsys memory
  96. Initializing cgroup subsys devices
  97. Initializing cgroup subsys freezer
  98. Initializing cgroup subsys blkio
  99. CPU: Testing write buffer coherency: ok
  100. ftrace: allocating 16422 entries in 33 pages
  101. devtmpfs: initialized
  102. regulator: core version 0.5
  103. regulator: dummy:
  104. NET: Registered protocol family 16
  105. OMAP GPIO hardware version 2.5
  106. OMAP GPIO hardware version 2.5
  107. OMAP GPIO hardware version 2.5
  108. OMAP GPIO hardware version 2.5
  109. OMAP GPIO hardware version 2.5
  110. OMAP GPIO hardware version 2.5
  111. omap_mux_init: Add partition: #1: core, flags: 0
  112. OMAP3 Beagle Rev: C4
  113. Found NAND on CS0
  114. Registering NAND on CS0
  115. Unable to get DVI reset GPIO
  116. platform iva.0: Enabled OPP corresponding to 720MHz
  117. OMAP DMA hardware revision 4.0
  118. bio: create slab <bio-0> at 0
  119. SCSI subsystem initialized
  120. usbcore: registered new interface driver usbfs
  121. usbcore: registered new interface driver hub
  122. usbcore: registered new device driver usb
  123. omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
  124. twl4030: PIH (irq 7) chaining IRQs 368..375
  125. twl4030: power (irq 373) chaining IRQs 376..383
  126. twl4030: gpio (irq 368) chaining IRQs 384..401
  127. regulator: VUSB1V5: 1500 mV normal standby
  128. regulator: VUSB1V8: 1800 mV normal standby
  129. regulator: VUSB3V1: 3100 mV normal standby
  130. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  131. regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  132. regulator: VDAC: 1800 mV normal standby
  133. regulator: VDVI: 1800 mV normal standby
  134. regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  135. omap_device: omap_i2c.2: new worst case activate latency 0: 30517
  136. omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz
  137. omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz
  138. Advanced Linux Sound Architecture Driver Version 1.0.23.
  139. Switching to clocksource 32k_counter
  140. musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  141. omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  142. musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  143. NET: Registered protocol family 2
  144. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  145. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  146. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  147. TCP: Hash tables configured (established 8192 bind 8192)
  148. TCP reno registered
  149. UDP hash table entries: 256 (order: 0, 4096 bytes)
  150. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  151. NET: Registered protocol family 1
  152. RPC: Registered udp transport module.
  153. RPC: Registered tcp transport module.
  154. RPC: Registered tcp NFSv4.1 backchannel transport module.
  155. platform iva.0: Enabled OPP corresponding to 720MHz
  156. VFS: Disk quotas dquot_6.5.2
  157. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  158. msgmni has been set to 468
  159. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  160. io scheduler noop registered
  161. io scheduler deadline registered
  162. io scheduler cfq registered (default)
  163. OMAP DSS rev 2.0
  164. OMAP DISPC rev 3.0
  165. OMAP VENC rev 2
  166. OMAP DSI rev 1.0
  167. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  168. omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  169. omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  170. omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  171. console [ttyO2] enabled
  172. brd: module loaded
  173. omap2-nand driver initializing
  174. ONFI flash detected
  175. ONFI param page 0 valid
  176. NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
  177. Creating 5 MTD partitions on "omap2-nand.0":
  178. 0x000000000000-0x000000080000 : "X-Loader"
  179. 0x000000080000-0x000000260000 : "U-Boot"
  180. 0x000000260000-0x000000280000 : "U-Boot Env"
  181. 0x000000280000-0x000000680000 : "Kernel"
  182. 0x000000680000-0x000010000000 : "File System"
  183. usbcore: registered new interface driver kaweth
  184. pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  185. usbcore: registered new interface driver pegasus
  186. usbcore: registered new interface driver asix
  187. usbcore: registered new interface driver cdc_ether
  188. usbcore: registered new interface driver dm9601
  189. usbcore: registered new interface driver smsc75xx
  190. usbcore: registered new interface driver smsc95xx
  191. usbcore: registered new interface driver net1080
  192. usbcore: registered new interface driver cdc_subset
  193. usbcore: registered new interface driver zaurus
  194. usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  195. usbcore: registered new interface driver int51x1
  196. cdc_ncm: 30-Nov-2010
  197. usbcore: registered new interface driver cdc_ncm
  198. console [netcon0] enabled
  199. netconsole: network logging started
  200. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  201. ehci-omap.0 supply hsusb0 not found, using dummy regulator
  202. ehci-omap.0 supply hsusb1 not found, using dummy regulator
  203. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  204. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  205. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  206. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  207. hub 1-0:1.0: USB hub found
  208. hub 1-0:1.0: 3 ports detected
  209. Initializing USB Mass Storage driver...
  210. usbcore: registered new interface driver usb-storage
  211. USB Mass Storage support registered.
  212. mice: PS/2 mouse device common for all mice
  213. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  214. twl_rtc twl_rtc: Power up reset detected.
  215. twl_rtc twl_rtc: Enabling TWL-RTC.
  216. omap_device: omap_wdt.-1: new worst case activate latency 0: 30517
  217. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  218. omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517
  219. cpuidle: using governor ladder
  220. cpuidle: using governor menu
  221. mmci-omap-hs: probe of mmci-omap-hs.1 failed with error -16
  222. usbcore: registered new interface driver usbhid
  223. usbhid: USB HID core driver
  224. OMAP3 Beagle/Devkit8000 SoC init
  225. asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  226. ALSA device list:
  227. #0: omap3beagle
  228. TCP cubic registered
  229. NET: Registered protocol family 17
  230. Registering the dns_resolver key type
  231. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  232. ThumbEE CPU extension supported.
  233. Power Management for TI OMAP3.
  234. sr_init: No PMIC hook to init smartreflex
  235. smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  236. smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  237. SmartReflex Class3 initialized
  238. clock: disabling unused clocks to save power
  239. registered taskstats version 1
  240. fbcvt: 1024x768@60: CVT Name - .786M3-R
  241. Console: switching to colour frame buffer device 128x48
  242. mmc0: new high speed SDHC card at address 0001
  243. mmcblk0: mmc0:0001 00000 7.60 GiB
  244. usb 1-2: new high speed USB device using ehci-omap and address 2
  245. mmcblk0: p1 p2
  246. regulator_init_complete: incomplete constraints, leaving VDAC on
  247. twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  248. EXT3-fs: barriers not enabled
  249. usb 1-2: applying rev.C fixup
  250. usb 1-2: applying rev.C fixup
  251. MOSCHIP usb-ethernet driver 1-2:1.0: eth0: register 'MOSCHIP usb-ethernet driver' at usb-ehci-omap.0-2, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:60:6e:00:6a:bb
  252. kjournald starting. Commit interval 5 seconds
  253. EXT3-fs (mmcblk0p2): using internal journal
  254. EXT3-fs (mmcblk0p2): recovery complete
  255. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  256. VFS: Mounted root (ext3 filesystem) on device 179:2.
  257. devtmpfs: mounted
  258. Freeing init memory: 312K
  259. INIT: version 2.88 booting
  260. Starting udevudev[67]: starting version 164
  261.  
  262. NET: Registered protocol family 10
  263. Starting Bootlog daemon: bootlogd.
  264.  
  265. Yocto (Built by Poky 5.0) 1.0+snapshot-20110927 beagleboard ttyO2
  266.  
  267. beagleboard login: D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-umAIzxGP2n,guid=c4e0fe844caa531f42c821030000001b
  268. gnome-keyring-daemon: Missing argument for --componentsgnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-GGSwVK
  269. GNOME_KEYRING_CONTROL=/tmp/keyring-eCAbmI
  270. SSH_AUTH_SOCK=/tmp/keyring-eCAbmI/ssh
  271. GPG_AGENT_INFO=/tmp/keyring-eCAbmI/gpg:0:1
  272. GNOME_KEYRING_PID=394
  273. SSH_AUTH_SOCK=/tmp/keyring-GGSwVK/ssh
  274. GPG_AGENT_INFO=/tmp/keyring-GGSwVK/gpg:0:1
  275. GNOME_KEYRING_PID=392
  276. gnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-2LM07S
  277. SSH_AUTH_SOCK=/tmp/keyring-2LM07S/ssh
  278. GPG_AGENT_INFO=/tmp/keyring-2LM07S/gpg:0:1
  279. GNOME_KEYRING_PID=401
  280. gnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-AKN4N2
  281. SSH_AUTH_SOCK=/tmp/keyring-AKN4N2/ssh
  282. GPG_AGENT_INFO=/tmp/keyring-AKN4N2/gpg:0:1
  283. GNOME_KEYRING_PID=405
  284. matchbox: Cant find a keycode for keysym 269025056
  285. matchbox: ignoring key shortcut XF86Calendar=!$contacts
  286.  
  287. matchbox: Cant find a keycode for keysym 2809
  288. matchbox: ignoring key shortcut telephone=!$dates
  289.  
  290. matchbox: Cant find a keycode for keysym 269025050
  291. matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
  292.  
  293. [settings daemon] Forking. run with -n to prevent fork
  294.  
  295. Yocto (Built by Poky 5.0) 1.0+snapshot-20110927 beagleboard ttyO2
  296.  
  297. beagleboard login:
  298. ** (matchbox-desktop:419): WARNING **: Error loading icon: Icon 'system-file-manager' not present in theme
  299.  
  300. ** (matchbox-desktop:419): WARNING **: Error loading icon: Icon 'preferences-desktop' not present in theme
  301.  
  302. ** (matchbox-desktop:419): WARNING **: Error loading icon: Icon 'computer' not present in theme
  303. root
  304. root@beagleboard:~# ping 192.168.42.100
  305. PING 192.168.42.100 (192.168.42.100): 56 data bytes
  306. 64 bytes from 192.168.42.100: seq=0 ttl=64 time=0.641 ms
  307. 64 bytes from 192.168.42.100: seq=1 ttl=64 time=0.519 ms
  308. 64 bytes from 192.168.42.100: seq=2 ttl=64 time=0.580 ms
  309. 
  310. --- 192.168.42.100 ping statistics ---
  311. 3 packets transmitted, 3 packets received, 0% packet loss
  312. round-trip min/avg/max = 0.519/0.580/0.641 ms
  313.  
  314. root@beagleboard:~#
  315.  
  316.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!