How to fix FAILED NOR/Nand Flash [Shutoff]

[FIX] PS3 E3 Flasher FAIL - Flash failed in middle of process because of letting go of nor clip.
Result: Blinking Red light, Auto-Shutoff, Acts overheated, Won't stay on, Quick yellow light then Red light, etc.
#######################################################################################################################
HOW TO FIX THIS ISSUE!
TUTORIAL BY BaSs_HaXoR:
#######################################################################################################################
First off, you should make sure you ALWAYS have the NorClip on sturdy to prevent this type of thing from happening, but in the end, it happens to the best of us.
#######################################################################################################################
#1) Try doing it like you normally would, attach the norchip how you're supposed to have it, and if it keeps shutting off almost INSTANTLY, go to next step.
#######################################################################################################################
#2) This is what you're here for, how to fix this stubborn, scary, and problematic issue. Flip the E3 Flasher clip 180* (degrees) on the Nor Chip. Make sure you have it pretty sturdy as it will need to be seen momentarily by the console.
#######################################################################################################################
#3) Now that you have the E3 Flasher clamp 180* (degrees) on the Nor Chip, turn the PS3 Console On. Your PS3 should stay on this time, but hold up -don't get to far ahead of yourself, you cannot flash your dump like this, it won't work.
#######################################################################################################################
#4) Here's where you have to be meticulous and quick. While the PS3 is still on, pull up on the E3 Clip so it's not connected anymore (Your PS3 Should still stay on (momentarily)) and flip it back 180* (degrees) to how it was like normal. This may take a few tries (trial and error), but once you get it, you should have your E3 Flasher clip over the Nor Chip on tight without it shutting your PS3 Console Off.
#######################################################################################################################
#5) FunFlash the dump over the corrupted Nor/Nand and you should be good to go! :)
#######################################################################################################################
//Reference from thread: http://www.ps3hax.net/showthread.php?t=64082
//BaSs_HaXoR