API tools faq
paste
Advertisement
RobertBerger

poky-5.0.1-sato-sdk

RobertBerger
May 14th, 2011
364
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.93 KB | None | 0 0
raw download clone embed print report
  1. Starting kernel ...
  2.  
  3. Uncompressing Linux... done, booting the kernel.
  4. Linux version 2.6.37.3-yocto-standard+ (rber@yocto-vm-1) (gcc version 4.5.1 (GCC) ) #1 PREEMPT Thu May 12 03:42:12 EEST 2011
  5. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  6. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. Machine: OMAP3 Beagle Board
  8. Memory policy: ECC disabled, Data cache writeback
  9. OMAP3630 ES1.0 (l2cache iva sgx neon isp 192mhz_clk )
  10. SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  11. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  12. Kernel command line: console=ttyO2,115200n8 mpurate=auto vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  13. PID hash table entries: 2048 (order: 1, 8192 bytes)
  14. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  15. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  16. Memory: 512MB = 512MB total
  17. Memory: 513960k/513960k available, 10328k reserved, 0K highmem
  18. Virtual kernel memory layout:
  19. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  20. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  21. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  22. vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
  23. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  24. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  25. .init : 0xc0008000 - 0xc004e000 ( 280 kB)
  26. .text : 0xc004e000 - 0xc0514574 (4890 kB)
  27. .data : 0xc0516000 - 0xc0565300 ( 317 kB)
  28. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  29. Preemptable hierarchical RCU implementation.
  30. NR_IRQS:402
  31. Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  32. Reprogramming SDRC clock to 332000000 Hz
  33. GPMC revision 5.0
  34. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  35. Total of 96 interrupts on 1 active controller
  36. OMAP GPIO hardware version 2.5
  37. OMAP clockevent source: GPTIMER12 at 32768 Hz
  38. Console: colour dummy device 80x30
  39. Calibrating delay loop... 506.27 BogoMIPS (lpj=1978368)
  40. pid_max: default: 32768 minimum: 301
  41. Security Framework initialized
  42. Mount-cache hash table entries: 512
  43. CPU: Testing write buffer coherency: ok
  44. ftrace: allocating 15305 entries in 30 pages
  45. regulator: core version 0.5
  46. regulator: dummy:
  47. NET: Registered protocol family 16
  48. OMAP3 Beagle Rev: xM
  49. Found NAND on CS0
  50. Registering NAND on CS0
  51. Unable to get DVI reset GPIO
  52. OMAP DMA hardware revision 5.0
  53. bio: create slab <bio-0> at 0
  54. SCSI subsystem initialized
  55. usbcore: registered new interface driver usbfs
  56. usbcore: registered new interface driver hub
  57. usbcore: registered new device driver usb
  58. i2c_omap i2c_omap.1: bus 1 rev4.0 at 2600 kHz
  59. twl4030: PIH (irq 7) chaining IRQs 368..375
  60. twl4030: power (irq 373) chaining IRQs 376..383
  61. twl4030: gpio (irq 368) chaining IRQs 384..401
  62. regulator: VUSB1V5: 1500 mV normal standby
  63. regulator: VUSB1V8: 1800 mV normal standby
  64. regulator: VUSB3V1: 3100 mV normal standby
  65. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  66. regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  67. regulator: VDAC: 1800 mV normal standby
  68. regulator: VDVI: 1800 mV normal standby
  69. regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  70. i2c_omap i2c_omap.3: bus 3 rev4.0 at 100 kHz
  71. Advanced Linux Sound Architecture Driver Version 1.0.23.
  72. Switching to clocksource 32k_counter
  73. musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  74. musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  75. NET: Registered protocol family 2
  76. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  77. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  78. TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  79. TCP: Hash tables configured (established 16384 bind 16384)
  80. TCP reno registered
  81. UDP hash table entries: 256 (order: 0, 4096 bytes)
  82. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  83. NET: Registered protocol family 1
  84. RPC: Registered udp transport module.
  85. RPC: Registered tcp transport module.
  86. RPC: Registered tcp NFSv4.1 backchannel transport module.
  87. VFS: Disk quotas dquot_6.5.2
  88. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  89. msgmni has been set to 1003
  90. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  91. io scheduler noop registered
  92. io scheduler deadline registered
  93. io scheduler cfq registered (default)
  94. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  95. omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  96. omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  97. omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  98. console [ttyO2] enabled
  99. omap-hsuart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
  100. brd: module loaded
  101. usbcore: registered new interface driver kaweth
  102. pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  103. usbcore: registered new interface driver pegasus
  104. usbcore: registered new interface driver asix
  105. usbcore: registered new interface driver cdc_ether
  106. usbcore: registered new interface driver dm9601
  107. usbcore: registered new interface driver smsc75xx
  108. usbcore: registered new interface driver smsc95xx
  109. usbcore: registered new interface driver net1080
  110. usbcore: registered new interface driver cdc_subset
  111. usbcore: registered new interface driver zaurus
  112. usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  113. usbcore: registered new interface driver int51x1
  114. console [netcon0] enabled
  115. netconsole: network logging started
  116. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  117. ehci-omap.0 supply hsusb0 not found, using dummy regulator
  118. ehci-omap.0 supply hsusb1 not found, using dummy regulator
  119. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  120. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  121. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  122. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  123. hub 1-0:1.0: USB hub found
  124. hub 1-0:1.0: 3 ports detected
  125. Initializing USB Mass Storage driver...
  126. usbcore: registered new interface driver usb-storage
  127. USB Mass Storage support registered.
  128. mice: PS/2 mouse device common for all mice
  129. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  130. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  131. cpuidle: using governor ladder
  132. cpuidle: using governor menu
  133. usbcore: registered new interface driver usbhid
  134. usbhid: USB HID core driver
  135. OMAP3 Beagle/Devkit8000 SoC init
  136. asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  137. ALSA device list:
  138. #0: omap3beagle
  139. TCP cubic registered
  140. NET: Registered protocol family 17
  141. Registering the dns_resolver key type
  142. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  143. Power Management for TI OMAP3.
  144. clock: disabling unused clocks to save power
  145. regulator_init_complete: incomplete constraints, leaving VDVI on
  146. regulator_init_complete: incomplete constraints, leaving VDAC on
  147. twl_rtc twl_rtc: setting system clock to 2011-05-12 21:26:44 UTC (1305235604)
  148. Waiting for root device /dev/mmcblk0p2...
  149. mmc0: host does not support reading read-only switch. assuming write-enable.
  150. mmc0: new high speed SDHC card at address 0001
  151. mmcblk0: mmc0:0001 00000 7.60 GiB
  152. mmcblk0: p1 p2
  153. usb 1-2: new high speed USB device using ehci-omap and address 2
  154. EXT3-fs: barriers not enabled
  155. kjournald starting. Commit interval 5 seconds
  156. EXT3-fs (mmcblk0p2): using internal journal
  157. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  158. VFS: Mounted root (ext3 filesystem) on device 179:2.
  159. Freeing init memory: 280K
  160. INIT: hub 1-2:1.0: USB hub found
  161. version 2.88 boohub 1-2:1.0: 5 ports detected
  162. ting
  163. Error opening /dev/fb0: No such device
  164. Starting udevusb 1-2.1: new high speed USB device using ehci-omap and address 3
  165. smsc95xx v1.0.4
  166. smsc95xx 1-2.1:1.0: usb0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, a2:5e:26:9b:3c:9b
  167. udev[60]: starting version 164
  168.  
  169. NET: Registered protocol family 10
  170. Configuring network interfaces... done.
  171. Starting portmap daemon...
  172. net.ipv4.conf.default.rp_filter = 1
  173. net.ipv4.conf.all.rp_filter = 1
  174. INIT: Entering runlevel: 5
  175. Starting system message bus: Unknown username "xuser" in message bus configuration file
  176. dbus.
  177. Starting Connection Manager
  178. Starting Xserver
  179. fbset: can't open '/dev/fb0': No such file or directory
  180. fbset: can't open '/dev/fb0': No such file or directory
  181. fbset: can't open '/dev/fb0': No such file or directory
  182.  
  183. Error opening framebuffer /dev/fb0: No such file or directory
  184.  
  185. Fatal server error:
  186. no screens found
  187. usb0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  188. xinit: giving up
  189. xinit: unable to connect to X server: Connection refused
  190. xinit: server error
  191. Timeout waiting for org.matchbox_project.desktop.Loaded
  192. Starting Dropbear SSH server: dropbear.
  193. Starting advanced power management daemon: No APM support in kernel
  194. (failed.)
  195. Starting Distributed Compiler Daemon: distcc.
  196. Starting syslogd/klogd: done
  197. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ]
  198. Starting tcf-agent: OK
  199.  
  200. Yocto (Built by Poky 5.0) 1.0 beagleboard ttyO2
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!