Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Initializing cgroup subsys cpu
- Linux version 3.16.0 (root@raver) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #3 SMP Wed Sep 10 23:51:19 CEST 2014
- Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0 root=/dev/sda2 ro libata.force=noncq
- KERNEL supported cpus:
- Intel GenuineIntel
- e820: BIOS-provided physical RAM map:
- BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
- BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
- BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
- BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
- BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
- BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
- BIOS-e820: [mem 0x0000000040005000-0x00000000b9bc6fff] usable
- BIOS-e820: [mem 0x00000000b9bc7000-0x00000000ba056fff] reserved
- BIOS-e820: [mem 0x00000000ba057000-0x00000000ba06afff] ACPI data
- BIOS-e820: [mem 0x00000000ba06b000-0x00000000ba192fff] ACPI NVS
- BIOS-e820: [mem 0x00000000ba193000-0x00000000ba80efff] reserved
- BIOS-e820: [mem 0x00000000ba80f000-0x00000000ba8abfff] type 20
- BIOS-e820: [mem 0x00000000ba8ac000-0x00000000ba8acfff] usable
- BIOS-e820: [mem 0x00000000ba8ad000-0x00000000ba8effff] ACPI NVS
- BIOS-e820: [mem 0x00000000ba8f0000-0x00000000bacfafff] usable
- BIOS-e820: [mem 0x00000000bacfb000-0x00000000baff3fff] reserved
- BIOS-e820: [mem 0x00000000baff4000-0x00000000baffffff] usable
- BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
- BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
- BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
- BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
- BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
- NX (Execute Disable) protection: active
- efi: EFI v2.31 by American Megatrends
- efi: ACPI=0xba05b000 ACPI 2.0=0xba05b000 SMBIOS=0xf04c0 MPS=0xfd470
- efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
- efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
- efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
- efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
- efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
- efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000c4a000) (11MB)
- efi: mem06: type=7, attr=0xf, range=[0x0000000000c4a000-0x0000000001000000) (3MB)
- efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
- efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
- efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002b4a000) (11MB)
- efi: mem10: type=7, attr=0xf, range=[0x0000000002b4a000-0x0000000020000000) (468MB)
- efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
- efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
- efi: mem13: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
- efi: mem14: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fc97000) (1020MB)
- efi: mem15: type=2, attr=0xf, range=[0x000000007fc97000-0x00000000ab691000) (697MB)
- efi: mem16: type=7, attr=0xf, range=[0x00000000ab691000-0x00000000ab697000) (0MB)
- efi: mem17: type=1, attr=0xf, range=[0x00000000ab697000-0x00000000ab781000) (0MB)
- efi: mem18: type=7, attr=0xf, range=[0x00000000ab781000-0x00000000ae882000) (49MB)
- efi: mem19: type=4, attr=0xf, range=[0x00000000ae882000-0x00000000ae8d9000) (0MB)
- efi: mem20: type=7, attr=0xf, range=[0x00000000ae8d9000-0x00000000ae8de000) (0MB)
- efi: mem21: type=4, attr=0xf, range=[0x00000000ae8de000-0x00000000b94d5000) (171MB)
- efi: mem22: type=7, attr=0xf, range=[0x00000000b94d5000-0x00000000b9920000) (4MB)
- efi: mem23: type=2, attr=0xf, range=[0x00000000b9920000-0x00000000b9929000) (0MB)
- efi: mem24: type=3, attr=0xf, range=[0x00000000b9929000-0x00000000b9bc7000) (2MB)
- efi: mem25: type=0, attr=0xf, range=[0x00000000b9bc7000-0x00000000b9fdb000) (4MB)
- efi: mem26: type=0, attr=0xf, range=[0x00000000b9fdb000-0x00000000b9fec000) (0MB)
- efi: mem27: type=0, attr=0xf, range=[0x00000000b9fec000-0x00000000b9ffb000) (0MB)
- efi: mem28: type=0, attr=0xf, range=[0x00000000b9ffb000-0x00000000b9ffd000) (0MB)
- efi: mem29: type=0, attr=0xf, range=[0x00000000b9ffd000-0x00000000ba004000) (0MB)
- efi: mem30: type=0, attr=0xf, range=[0x00000000ba004000-0x00000000ba057000) (0MB)
- efi: mem31: type=9, attr=0xf, range=[0x00000000ba057000-0x00000000ba05b000) (0MB)
- efi: mem32: type=9, attr=0xf, range=[0x00000000ba05b000-0x00000000ba06b000) (0MB)
- efi: mem33: type=10, attr=0xf, range=[0x00000000ba06b000-0x00000000ba0e9000) (0MB)
- efi: mem34: type=10, attr=0xf, range=[0x00000000ba0e9000-0x00000000ba193000) (0MB)
- efi: mem35: type=6, attr=0x800000000000000f, range=[0x00000000ba193000-0x00000000ba5d9000) (4MB)
- efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000ba5d9000-0x00000000ba80f000) (2MB)
- efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000ba80f000-0x00000000ba82e000) (0MB)
- efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000ba82e000-0x00000000ba8ac000) (0MB)
- efi: mem39: type=4, attr=0xf, range=[0x00000000ba8ac000-0x00000000ba8ad000) (0MB)
- efi: mem40: type=10, attr=0xf, range=[0x00000000ba8ad000-0x00000000ba8f0000) (0MB)
- efi: mem41: type=4, attr=0xf, range=[0x00000000ba8f0000-0x00000000baa39000) (1MB)
- efi: mem42: type=3, attr=0xf, range=[0x00000000baa39000-0x00000000baccb000) (2MB)
- efi: mem43: type=4, attr=0xf, range=[0x00000000baccb000-0x00000000bacd1000) (0MB)
- efi: mem44: type=3, attr=0xf, range=[0x00000000bacd1000-0x00000000bacd5000) (0MB)
- efi: mem45: type=4, attr=0xf, range=[0x00000000bacd5000-0x00000000bace2000) (0MB)
- efi: mem46: type=3, attr=0xf, range=[0x00000000bace2000-0x00000000bacf4000) (0MB)
- efi: mem47: type=4, attr=0xf, range=[0x00000000bacf4000-0x00000000bacfb000) (0MB)
- efi: mem48: type=6, attr=0x800000000000000f, range=[0x00000000bacfb000-0x00000000baff4000) (2MB)
- efi: mem49: type=4, attr=0xf, range=[0x00000000baff4000-0x00000000bb000000) (0MB)
- efi: mem50: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f600000) (5110MB)
- efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
- efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
- efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
- efi: mem54: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
- efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
- efi: mem56: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
- e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- e820: remove [mem 0x000a0000-0x000fffff] usable
- e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-BFFFF uncachable
- C0000-CFFFF write-protect
- D0000-DFFFF uncachable
- E0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask E00000000 write-back
- 1 base 200000000 mask FC0000000 write-back
- 2 base 0C0000000 mask FC0000000 uncachable
- 3 base 0BC000000 mask FFC000000 uncachable
- 4 base 0BB800000 mask FFF800000 uncachable
- 5 base 23F800000 mask FFF800000 uncachable
- 6 base 23F600000 mask FFFE00000 uncachable
- 7 disabled
- 8 disabled
- 9 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- original variable MTRRs
- reg 0, base: 0GB, range: 8GB, type WB
- reg 1, base: 8GB, range: 1GB, type WB
- reg 2, base: 3GB, range: 1GB, type UC
- reg 3, base: 3008MB, range: 64MB, type UC
- reg 4, base: 3000MB, range: 8MB, type UC
- reg 5, base: 9208MB, range: 8MB, type UC
- reg 6, base: 9206MB, range: 2MB, type UC
- total RAM covered: 8110M
- Found optimal setting for mtrr clean up
- gran_size: 64K chunk_size: 128M num_reg: 8 lose cover RAM: 0G
- New variable MTRRs
- reg 0, base: 0GB, range: 2GB, type WB
- reg 1, base: 2GB, range: 1GB, type WB
- reg 2, base: 3000MB, range: 8MB, type UC
- reg 3, base: 3008MB, range: 64MB, type UC
- reg 4, base: 4GB, range: 4GB, type WB
- reg 5, base: 8GB, range: 1GB, type WB
- reg 6, base: 9206MB, range: 2MB, type UC
- reg 7, base: 9208MB, range: 8MB, type UC
- e820: update [mem 0xbb800000-0xffffffff] usable ==> reserved
- e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
- Base memory trampoline at [ffff880000098000] 98000 size 24576
- init_memory_mapping: [mem 0x00000000-0x000fffff]
- [mem 0x00000000-0x000fffff] page 4k
- BRK [0x027bc000, 0x027bcfff] PGTABLE
- BRK [0x027bd000, 0x027bdfff] PGTABLE
- BRK [0x027be000, 0x027befff] PGTABLE
- init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
- [mem 0x23f400000-0x23f5fffff] page 2M
- BRK [0x027bf000, 0x027bffff] PGTABLE
- init_memory_mapping: [mem 0x23c000000-0x23f3fffff]
- [mem 0x23c000000-0x23f3fffff] page 2M
- init_memory_mapping: [mem 0x200000000-0x23bffffff]
- [mem 0x200000000-0x23bffffff] page 2M
- init_memory_mapping: [mem 0x00100000-0x1fffffff]
- [mem 0x00100000-0x001fffff] page 4k
- [mem 0x00200000-0x1fffffff] page 2M
- init_memory_mapping: [mem 0x20200000-0x40003fff]
- [mem 0x20200000-0x3fffffff] page 2M
- [mem 0x40000000-0x40003fff] page 4k
- BRK [0x027c0000, 0x027c0fff] PGTABLE
- BRK [0x027c1000, 0x027c1fff] PGTABLE
- init_memory_mapping: [mem 0x40005000-0xb9bc6fff]
- [mem 0x40005000-0x401fffff] page 4k
- [mem 0x40200000-0xb99fffff] page 2M
- [mem 0xb9a00000-0xb9bc6fff] page 4k
- init_memory_mapping: [mem 0xba8ac000-0xba8acfff]
- [mem 0xba8ac000-0xba8acfff] page 4k
- init_memory_mapping: [mem 0xba8f0000-0xbacfafff]
- [mem 0xba8f0000-0xba9fffff] page 4k
- [mem 0xbaa00000-0xbabfffff] page 2M
- [mem 0xbac00000-0xbacfafff] page 4k
- init_memory_mapping: [mem 0xbaff4000-0xbaffffff]
- [mem 0xbaff4000-0xbaffffff] page 4k
- init_memory_mapping: [mem 0x100000000-0x1ffffffff]
- [mem 0x100000000-0x1ffffffff] page 2M
- ACPI: Early table checksum verification disabled
- ACPI: RSDP 0x00000000BA05B000 000024 (v02 SECCSD)
- ACPI: XSDT 0x00000000BA05B090 00009C (v01 SECCSD LH43STAR 01072009 AMI 00010013)
- ACPI: FACP 0x00000000BA066B30 00010C (v05 SECCSD LH43STAR 01072009 AMI 00010013)
- ACPI: DSDT 0x00000000BA05B1B8 00B976 (v02 SECCSD LH43STAR 00000022 INTL 20051117)
- ACPI: FACS 0x00000000BA190080 000040
- ACPI: APIC 0x00000000BA066C40 000092 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
- ACPI: FPDT 0x00000000BA066CD8 000044 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
- ACPI: MCFG 0x00000000BA066D20 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00000097)
- ACPI: MSDM 0x00000000BA066D60 000055 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
- ACPI: SSDT 0x00000000BA066DB8 0006E9 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
- ACPI: HPET 0x00000000BA0674A8 000038 (v01 SECCSD LH43STAR 01072009 AMI. 00000005)
- ACPI: SSDT 0x00000000BA0674E0 0002BD (v01 SataRe SataTabl 00001000 INTL 20091112)
- ACPI: SSDT 0x00000000BA0677A0 000926 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- ACPI: SSDT 0x00000000BA0680C8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
- ACPI: BGRT 0x00000000BA068B60 000038 (v00 SECCSD LH43STAR 01072009 AMI 00010013)
- ACPI: SSDT 0x00000000BA068B98 000793 (v01 SgRef SgTabl 00001000 INTL 20051117)
- ACPI: SSDT 0x00000000BA069330 000E5A (v01 AmdRef AmdTabl 00001000 INTL 20051117)
- ACPI: SLIC 0x00000000BA06A190 000176 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
- ACPI: SLIC 0x00000000BA06A308 000176 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
- ACPI: Local APIC address 0xfee00000
- No NUMA configuration found
- Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
- Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
- NODE_DATA [mem 0x23f5f2000-0x23f5f6fff]
- [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
- Zone ranges:
- DMA [mem 0x00001000-0x00ffffff]
- DMA32 [mem 0x01000000-0xffffffff]
- Normal [mem 0x100000000-0x23f5fffff]
- Movable zone start for each node
- Early memory node ranges
- node 0: [mem 0x00001000-0x0009efff]
- node 0: [mem 0x00100000-0x1fffffff]
- node 0: [mem 0x20200000-0x40003fff]
- node 0: [mem 0x40005000-0xb9bc6fff]
- node 0: [mem 0xba8ac000-0xba8acfff]
- node 0: [mem 0xba8f0000-0xbacfafff]
- node 0: [mem 0xbaff4000-0xbaffffff]
- node 0: [mem 0x100000000-0x23f5fffff]
- On node 0 totalpages: 2069372
- DMA zone: 64 pages used for memmap
- DMA zone: 25 pages reserved
- DMA zone: 3998 pages, LIFO batch:0
- DMA32 zone: 11832 pages used for memmap
- DMA32 zone: 757214 pages, LIFO batch:31
- Normal zone: 20440 pages used for memmap
- Normal zone: 1308160 pages, LIFO batch:31
- Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
- ACPI: PM-Timer IO Port: 0x408
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
- ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8086a701 base: 0xfed00000
- smpboot: Allowing 8 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 40
- PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
- PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
- PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
- PM: Registered nosave memory: [mem 0xb9bc7000-0xba056fff]
- PM: Registered nosave memory: [mem 0xba057000-0xba06afff]
- PM: Registered nosave memory: [mem 0xba06b000-0xba192fff]
- PM: Registered nosave memory: [mem 0xba193000-0xba80efff]
- PM: Registered nosave memory: [mem 0xba80f000-0xba8abfff]
- PM: Registered nosave memory: [mem 0xba8ad000-0xba8effff]
- PM: Registered nosave memory: [mem 0xbacfb000-0xbaff3fff]
- PM: Registered nosave memory: [mem 0xbb000000-0xbb9fffff]
- PM: Registered nosave memory: [mem 0xbba00000-0xbf9fffff]
- PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
- PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
- PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
- PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
- PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
- PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
- PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
- PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
- PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
- PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
- PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
- PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
- e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
- setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- PERCPU: Embedded 26 pages/cpu @ffff88023f200000 s74752 r8192 d23552 u262144
- pcpu-alloc: s74752 r8192 d23552 u262144 alloc=1*2097152
- pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2037011
- Policy zone: Normal
- Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0 root=/dev/sda2 ro libata.force=noncq
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- xsave: enabled xstate_bv 0x7, cntxt size 0x340
- Memory: 7887964K/8277488K available (3970K kernel code, 422K rwdata, 1856K rodata, 692K init, 636K bss, 389524K reserved)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- Hierarchical RCU implementation.
- RCU dyntick-idle grace-period acceleration is enabled.
- Offload RCU callbacks from all CPUs
- Offload RCU callbacks from CPUs: 0-7.
- NR_IRQS:4352 nr_irqs:744 16
- Console: colour dummy device 80x25
- console [tty0] enabled
- hpet clockevent registered
- tsc: Fast TSC calibration using PIT
- tsc: Detected 2394.722 MHz processor
- Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.44 BogoMIPS (lpj=9578888)
- pid_max: default: 32768 minimum: 301
- ACPI: Core revision 20140424
- ACPI: All ACPI Tables successfully acquired
- Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- mce: CPU supports 9 MCE banks
- CPU0: Thermal monitoring enabled (TM1)
- Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
- Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
- tlb_flushall_shift: 2
- Freeing SMP alternatives memory: 16K (ffffffff81718000 - ffffffff8171c000)
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
- TSC deadline timer enabled
- Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
- ... version: 3
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 0000ffffffffffff
- ... fixed-purpose events: 3
- ... event mask: 000000070000000f
- x86: Booting SMP configuration:
- .... node #0, CPUs: #1
- NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
- #2 #3 #4 #5 #6 #7
- x86: Booted up 1 node, 8 CPUs
- smpboot: Total of 8 processors activated (38315.55 BogoMIPS)
- devtmpfs: initialized
- PM: Registering ACPI NVS region [mem 0xba06b000-0xba192fff] (1212416 bytes)
- PM: Registering ACPI NVS region [mem 0xba8ad000-0xba8effff] (274432 bytes)
- NET: Registered protocol family 16
- cpuidle: using governor ladder
- cpuidle: using governor menu
- ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
- ACPI: bus type PCI registered
- PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- PCI: Using configuration type 1 for base access
- ACPI: Added _OSI(Module Device)
- ACPI: Added _OSI(Processor Device)
- ACPI: Added _OSI(3.0 _SCP Extensions)
- ACPI: Added _OSI(Processor Aggregator Device)
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFF8802355B9000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFF880235602C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
- ACPI: Dynamic OEM Table Load:
- ACPI: SSDT 0xFFFF8802355FC000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
- ACPI: Interpreter enabled
- ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
- ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
- ACPI: (supports S0 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
- acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
- acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [bus 00-3e]
- pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
- pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
- pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
- pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
- pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:01.0: System wakeup disabled by ACPI
- pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
- pci 0000:00:02.0: reg 0x10: [mem 0xbfc00000-0xbfffffff 64bit]
- pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
- pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
- pci 0000:00:14.0: reg 0x10: [mem 0xc0200000-0xc020ffff 64bit]
- pci 0000:00:14.0: PME# supported from D3hot D3cold
- pci 0000:00:14.0: System wakeup disabled by ACPI
- pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
- pci 0000:00:16.0: reg 0x10: [mem 0xc021a000-0xc021a00f 64bit]
- pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
- pci 0000:00:1a.0: reg 0x10: [mem 0xc0218000-0xc02183ff]
- pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1a.0: System wakeup disabled by ACPI
- pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
- pci 0000:00:1b.0: reg 0x10: [mem 0xc0210000-0xc0213fff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: System wakeup disabled by ACPI
- pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: System wakeup disabled by ACPI
- pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
- pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: System wakeup disabled by ACPI
- pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
- pci 0000:00:1d.0: reg 0x10: [mem 0xc0217000-0xc02173ff]
- pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.0: System wakeup disabled by ACPI
- pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
- pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
- pci 0000:00:1f.2: reg 0x10: [io 0x40b0-0x40b7]
- pci 0000:00:1f.2: reg 0x14: [io 0x40a0-0x40a3]
- pci 0000:00:1f.2: reg 0x18: [io 0x4090-0x4097]
- pci 0000:00:1f.2: reg 0x1c: [io 0x4080-0x4083]
- pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
- pci 0000:00:1f.2: reg 0x24: [mem 0xc0216000-0xc02167ff]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
- pci 0000:00:1f.3: reg 0x10: [mem 0xc0215000-0xc02150ff 64bit]
- pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
- pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
- pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:01:00.0: reg 0x18: [mem 0xc0120000-0xc013ffff 64bit]
- pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
- pci 0000:01:00.0: reg 0x30: [mem 0xc0100000-0xc011ffff pref]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:01:00.0: System wakeup disabled by ACPI
- pci 0000:00:01.0: PCI bridge to [bus 01]
- pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
- pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
- pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
- pci 0000:02:00.0: reg 0x18: [mem 0xc0004000-0xc0004fff 64bit pref]
- pci 0000:02:00.0: reg 0x20: [mem 0xc0000000-0xc0003fff 64bit pref]
- pci 0000:02:00.0: supports D1 D2
- pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:02:00.0: System wakeup disabled by ACPI
- pci 0000:00:1c.0: PCI bridge to [bus 02]
- pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc00fffff]
- pci 0000:00:1c.1: PCI bridge to [bus 03]
- acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
- ACPI: Enabled 5 GPEs in block 00 to 3F
- ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:01:00.0
- vgaarb: no bridge control possible 0000:00:02.0
- SCSI subsystem initialized
- libata version 3.00 loaded.
- ACPI: bus type USB registered
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
- e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
- e820: reserve RAM buffer [mem 0xb9bc7000-0xbbffffff]
- e820: reserve RAM buffer [mem 0xba8ad000-0xbbffffff]
- e820: reserve RAM buffer [mem 0xbacfb000-0xbbffffff]
- e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
- e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
- hpet0: 8 comparators, 64-bit 14.318180 MHz counter
- Switched to clocksource hpet
- pnp: PnP ACPI init
- ACPI: bus type PNP registered
- system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
- system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
- system 00:01: [io 0x0680-0x069f] has been reserved
- system 00:01: [io 0x1000-0x100f] has been reserved
- system 00:01: [io 0xffff] has been reserved
- system 00:01: [io 0xffff] has been reserved
- system 00:01: [io 0x0400-0x0453] could not be reserved
- system 00:01: [io 0x0458-0x047f] has been reserved
- system 00:01: [io 0x0500-0x057f] has been reserved
- system 00:01: [io 0x164e-0x164f] has been reserved
- system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- system 00:02: [io 0x0454-0x0457] has been reserved
- system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
- system 00:03: [io 0x04d0-0x04d1] has been reserved
- system 00:03: [io 0xfd60-0xfd63] has been reserved
- system 00:03: [mem 0xff000000-0xff000fff] has been reserved
- system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:04: Plug and Play ACPI device, IDs SYN2601 PNP0f13 (active)
- pnp 00:05: Plug and Play ACPI device, IDs MSF0001 PNP030b (active)
- pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
- system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
- system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
- system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
- system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
- system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
- system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
- system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
- system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
- system 00:07: [mem 0xff010000-0xffffffff] has been reserved
- system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
- system 00:07: [mem 0xbfa00000-0xbfa00fff] has been reserved
- system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
- system 00:08: [mem 0x20000000-0x201fffff] has been reserved
- system 00:08: [mem 0x40004000-0x40004fff] has been reserved
- system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 9 devices
- ACPI: bus type PNP unregistered
- pci 0000:00:01.0: PCI bridge to [bus 01]
- pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
- pci 0000:00:01.0: bridge window [mem 0xc0100000-0xc01fffff]
- pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
- pci 0000:00:1c.0: PCI bridge to [bus 02]
- pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc00fffff]
- pci 0000:00:1c.1: PCI bridge to [bus 03]
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
- pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
- pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
- pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
- pci_bus 0000:00: resource 11 [mem 0xbfa00000-0xfeafffff]
- pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
- pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
- pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
- pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
- pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc00fffff]
- NET: Registered protocol family 2
- TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 65536 bind 65536)
- TCP: reno registered
- UDP hash table entries: 4096 (order: 5, 131072 bytes)
- UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- NET: Registered protocol family 1
- pci 0000:00:02.0: Boot video device
- pci 0000:00:14.0: enabling device (0000 -> 0002)
- pci 0000:00:1a.0: enabling device (0000 -> 0002)
- pci 0000:00:1d.0: enabling device (0000 -> 0002)
- PCI: CLS 64 bytes, default 64
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- software IO TLB [mem 0xaa882000-0xae882000] (64MB) mapped at [ffff8800aa882000-ffff8800ae881fff]
- RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
- AVX version of gcm_enc/dec engaged.
- futex hash table entries: 2048 (order: 5, 131072 bytes)
- fuse init (API version 7.23)
- msgmni has been set to 15764
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- io scheduler noop registered (default)
- io scheduler deadline registered
- io scheduler cfq registered
- pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
- efifb: probing for efifb
- efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 4160k, total 4160k
- efifb: mode is 1366x768x32, linelength=5504, pages=1
- efifb: scrolling: redraw
- efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- Console: switching to colour frame buffer device 170x48
- fb0: EFI VGA frame buffer device
- intel_idle: MWAIT substates: 0x21120
- intel_idle: v0.4 model 0x3A
- intel_idle: lapic_timer_reliable_states 0xffffffff
- ACPI: AC Adapter [ACAD] (off-line)
- input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- ACPI: Power Button [PWRB]
- input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
- ACPI: Lid Switch [LID0]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- ACPI: Power Button [PWRF]
- thermal LNXTHERM:00: registered as thermal_zone0
- ACPI: Thermal Zone [TZ00] (31 C)
- GHES: HEST is not enabled!
- ACPI: Battery Slot [BAT1] (battery present)
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
- ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
- ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata1: SATA max UDMA/133 abar m2048@0xc0216000 port 0xc0216100 irq 41
- ata2: DUMMY
- ata3: DUMMY
- ata4: DUMMY
- ata5: SATA max UDMA/133 abar m2048@0xc0216000 port 0xc0216300 irq 41
- ata6: DUMMY
- i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mousedev: PS/2 mouse device common for all mice
- rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
- rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
- Intel P-state driver initializing.
- Intel pstate controlling: cpu 0
- Intel pstate controlling: cpu 1
- Intel pstate controlling: cpu 2
- Intel pstate controlling: cpu 3
- Intel pstate controlling: cpu 4
- Intel pstate controlling: cpu 5
- Intel pstate controlling: cpu 6
- Intel pstate controlling: cpu 7
- TCP: cubic registered
- NET: Registered protocol family 17
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
- registered taskstats version 1
- rtc_cmos 00:06: setting system clock to 2014-09-14 10:54:49 UTC (1410692089)
- ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- ata1.00: FORCE: horkage modified (noncq)
- ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
- ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (not used)
- ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
- ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
- ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2
- sd 0:0:0:0: [sda] Attached SCSI disk
- ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata5.00: FORCE: horkage modified (noncq)
- ata5.00: ATAPI: TSSTcorp CDDVDW SN-208DN, SC00, max UDMA/100
- ata5.00: configured for UDMA/100
- scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208DN SC00 PQ: 0 ANSI: 5
- EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
- EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
- EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
- devtmpfs: mounted
- Freeing unused kernel memory: 692K (ffffffff8166b000 - ffffffff81718000)
- Write protecting the kernel read-only data: 6144k
- Freeing unused kernel memory: 116K (ffff8800023e3000 - ffff880002400000)
- Freeing unused kernel memory: 192K (ffff8800025d0000 - ffff880002600000)
- random: init urandom read with 33 bits of entropy available
- tsc: Refined TSC clocksource calibration: 2394.562 MHz
- init: plymouth-upstart-bridge main process (128) terminated with status 1
- init: plymouth-upstart-bridge main process ended, respawning
- init: plymouth-upstart-bridge main process (139) terminated with status 1
- init: plymouth-upstart-bridge main process ended, respawning
- init: ureadahead main process (131) terminated with status 5
- init: mounted-proc main process (156) terminated with status 1
- systemd-udevd[254]: starting version 204
- wmi: Mapper loaded
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- xhci_hcd 0000:00:14.0: xHCI Host Controller
- xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
- xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
- xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: xHCI Host Controller
- usb usb1: Manufacturer: Linux 3.16.0 xhci_hcd
- usb usb1: SerialNumber: 0000:00:14.0
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 4 ports detected
- ehci-pci: EHCI PCI platform driver
- xhci_hcd 0000:00:14.0: xHCI Host Controller
- xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: xHCI Host Controller
- usb usb2: Manufacturer: Linux 3.16.0 xhci_hcd
- usb usb2: SerialNumber: 0000:00:14.0
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 4 ports detected
- Linux agpgart interface v0.103
- ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
- ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
- ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-258)
- ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- lpc_ich: Resource conflict(s) found affecting gpio_ich
- ehci-pci 0000:00:1a.0: EHCI Host Controller
- ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
- ehci-pci 0000:00:1a.0: debug port 2
- [drm] Initialized drm 1.1.0 20060810
- ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
- ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0218000
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
- r8169 0000:02:00.0: irq 43 for MSI/MSI-X
- r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc90000c7c000, 20:89:84:1b:c4:dd, XID 08000800 IRQ 43
- r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: EHCI Host Controller
- usb usb3: Manufacturer: Linux 3.16.0 ehci_hcd
- usb usb3: SerialNumber: 0000:00:1a.0
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- ehci-pci 0000:00:1d.0: EHCI Host Controller
- ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
- ehci-pci 0000:00:1d.0: debug port 2
- microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
- ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
- ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0217000
- [drm] radeon kernel modesetting enabled.
- VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
- checking generic (d0000000 410000) vs hw (e0000000 10000000)
- radeon 0000:01:00.0: enabling device (0000 -> 0003)
- [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x144D:0xC0D8).
- [drm] register mmio base: 0xC0120000
- [drm] register mmio size: 131072
- microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU0 updated to revision 0x1b, date = 2014-05-29
- microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU1 updated to revision 0x1b, date = 2014-05-29
- microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU2 updated to revision 0x1b, date = 2014-05-29
- microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU3 updated to revision 0x1b, date = 2014-05-29
- microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU4 updated to revision 0x1b, date = 2014-05-29
- microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU5 updated to revision 0x1b, date = 2014-05-29
- microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU6 updated to revision 0x1b, date = 2014-05-29
- microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
- microcode: CPU7 updated to revision 0x1b, date = 2014-05-29
- microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: EHCI Host Controller
- usb usb4: Manufacturer: Linux 3.16.0 ehci_hcd
- usb usb4: SerialNumber: 0000:00:1d.0
- sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 4:0:0:0: Attached scsi CD-ROM sr0
- intel_rapl: RAPL domain dram detection failed
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- usb 3-1: new high-speed USB device number 2 using ehci-pci
- EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
- init: failsafe main process (520) killed by TERM signal
- Bluetooth: Core ver 2.19
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- init: cups main process (612) killed by HUP signal
- init: cups main process ended, respawning
- usb 3-1: New USB device found, idVendor=8087, idProduct=0024
- usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 3-1:1.0: USB hub found
- hub 3-1:1.0: 6 ports detected
- Switched to clocksource tsc
- mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
- iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- init: alsa-restore main process (906) terminated with status 19
- random: nonblocking pool is initialized
- vboxdrv: Found 8 processor cores.
- vboxdrv: fAsync=0 offMin=0x195 offMax=0xd8f
- vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
- vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
- vboxpci: pci-stub module not available, cannot detach PCI devices
- vboxpci: IOMMU not found (not registered)
- psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00333/0x240000/0xa2400, board id: 1874, fw id: 1116252
- input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
- ATOM BIOS: Samsung
- [drm] GPU not posted. posting now...
- radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
- radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
- [drm] Detected VRAM RAM=1024M, BAR=256M
- [drm] RAM width 128bits DDR
- [TTM] Zone kernel: Available graphics memory: 4036150 kiB
- [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [TTM] Initializing pool allocator
- [TTM] Initializing DMA pool allocator
- [drm] radeon: 1024M of VRAM memory ready
- [drm] radeon: 1024M of GTT memory ready.
- [drm] Loading TURKS Microcode
- systemd-udevd[282]: Failed to apply ACL on /dev/bus/usb/003/002: Operation not supported
- usb 4-1: new high-speed USB device number 2 using ehci-pci
- [drm] Internal thermal controller without fan control
- [drm] radeon: power management initialized
- [drm] GART: num cpu pages 262144, num gpu pages 262144
- [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
- [drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
- radeon 0000:01:00.0: WB enabled
- radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88022a2a7c00
- radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88022a2a7c0c
- radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc900055b2118
- [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [drm] Driver supports precise vblank timestamp query.
- radeon 0000:01:00.0: irq 45 for MSI/MSI-X
- radeon 0000:01:00.0: radeon: using MSI.
- [drm] radeon: irq initialized.
- [drm] ring test on 0 succeeded in 1 usecs
- [drm] ring test on 3 succeeded in 1 usecs
- usb 4-1: New USB device found, idVendor=8087, idProduct=0024
- usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- hub 4-1:1.0: USB hub found
- hub 4-1:1.0: 6 ports detected
- systemd-udevd[281]: Failed to apply ACL on /dev/bus/usb/004/002: Operation not supported
- usb 3-1.1: new high-speed USB device number 3 using ehci-pci
- [drm] ring test on 5 succeeded in 1 usecs
- [drm] UVD initialized successfully.
- [drm] ib test on ring 0 succeeded in 0 usecs
- [drm] ib test on ring 3 succeeded in 0 usecs
- usb 3-1.1: New USB device found, idVendor=0bda, idProduct=0129
- usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 3-1.1: Product: USB2.0-CRW
- usb 3-1.1: Manufacturer: Generic
- usb 3-1.1: SerialNumber: 20100201396000000
- usb 3-1.4: new high-speed USB device number 4 using ehci-pci
- [drm] ib test on ring 5 succeeded
- [drm] Radeon Display Connectors
- radeon 0000:01:00.0: No connectors reported connected with modes
- [drm] Cannot find any crtc or sizes - going 1024x768
- [drm] fb mappable at 0xE0474000
- [drm] vram apper at 0xE0000000
- [drm] size 3145728
- [drm] fb depth is 24
- [drm] pitch is 4096
- checking generic (d0000000 410000) vs hw (e0000000 10000000)
- radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
- radeon 0000:01:00.0: registered panic notifier
- [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
- [drm] Memory usable by graphics device = 2048M
- [drm] Replacing VGA console driver
- checking generic (d0000000 410000) vs hw (d0000000 10000000)
- fb: switching to inteldrmfb from EFI VGA
- Console: switching to colour dummy device 80x25
- systemd-udevd[282]: Failed to apply ACL on /dev/dri/card0: Operation not supported
- i915 0000:00:02.0: irq 46 for MSI/MSI-X
- [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [drm] Driver supports precise vblank timestamp query.
- vga_switcheroo: enabled
- ATPX version 1, functions 0x00000003
- vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
- vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
- fbcon: inteldrmfb (fb0) is primary device
- usb 3-1.4: New USB device found, idVendor=2232, idProduct=1029
- usb 3-1.4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
- usb 3-1.4: Product: WebCam SC-13HDL11939N
- usb 3-1.4: Manufacturer: Generic
- usb 3-1.4: SerialNumber: 200901010001
- systemd-udevd[281]: Failed to apply ACL on /dev/bus/usb/003/004: Operation not supported
- Linux video capture interface: v2.00
- uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11939N (2232:1029)
- input: WebCam SC-13HDL11939N as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input6
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (1.1.1)
- systemd-udevd[281]: Failed to apply ACL on /dev/video0: Operation not supported
- [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
- [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
- Console: switching to colour frame buffer device 170x48
- i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
- ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
- input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/LNXVIDEO:00/input/input7
- ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
- input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
- [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
- systemd-udevd[283]: Failed to apply ACL on /dev/dri/card1: Operation not supported
- systemd-udevd[283]: Failed to apply ACL on /dev/dri/card1: Operation not supported
- snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
- systemd-udevd[282]: Failed to apply ACL on /dev/dri/card1: Operation not supported
- systemd-udevd[282]: Failed to apply ACL on /dev/dri/card1: Operation not supported
- systemd-udevd[282]: Failed to apply ACL on /dev/dri/card1: Operation not supported
- sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
- sound hdaudioC0D0: mono: mono_out=0x0
- sound hdaudioC0D0: inputs:
- sound hdaudioC0D0: Internal Mic=0x19
- sound hdaudioC0D0: Mic=0x18
- systemd-udevd[281]: Failed to apply ACL on /dev/snd/controlC0: Operation not supported
- systemd-udevd[284]: Failed to apply ACL on /dev/snd/pcmC0D0c: Operation not supported
- systemd-udevd[282]: Failed to apply ACL on /dev/snd/pcmC0D0p: Operation not supported
- input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
- input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
- systemd-udevd[282]: Failed to apply ACL on /dev/snd/pcmC0D3p: Operation not supported
- systemd-udevd[282]: Failed to apply ACL on /dev/snd/hwC0D3: Operation not supported
- systemd-udevd[281]: Failed to apply ACL on /dev/snd/hwC0D0: Operation not supported
- init: plymouth-upstart-bridge main process ended, respawning
- [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
- init: plymouth-stop pre-start process (1787) terminated with status 1
- # lspci -vvv
- 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=0c <?>
- Kernel driver in use: ivb_uncore
- 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- I/O behind bridge: 00003000-00003fff
- Memory behind bridge: c0100000-c01fffff
- Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device c0d8
- Capabilities: [80] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: feeff00c Data: 4161
- Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 256 bytes, PhantFunc 0
- ExtTag- RBE+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 256 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- LnkCap: Port #2, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <8us
- ClockPM- Surprise- LLActRep- BwNot+
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd-
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending+ InProgress-
- Capabilities: [140 v1] Root Complex Link
- Desc: PortNumber=02 ComponentID=01 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed19000
- Capabilities: [d94 v1] #19
- Kernel driver in use: pcieport
- 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 46
- Region 0: Memory at bfc00000 (64-bit, non-prefetchable) [size=4M]
- Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
- Region 4: I/O ports at 4000 [size=64]
- Expansion ROM at <unassigned> [disabled]
- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: feeff00c Data: 41e1
- Capabilities: [d0] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [a4] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: i915
- 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 42
- Region 0: Memory at c0200000 (64-bit, non-prefetchable) [size=64K]
- Capabilities: [70] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
- Address: 00000000feeff00c Data: 41a1
- Kernel driver in use: xhci_hcd
- 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 43
- Region 0: Memory at c021a000 (64-bit, non-prefetchable) [size=16]
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000feeff00c Data: 41b1
- Kernel driver in use: mei_me
- 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 0: Memory at c0218000 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Capabilities: [98] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ehci-pci
- 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 47
- Region 0: Memory at c0210000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000feeff00c Data: 4142
- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0
- ExtTag- RBE-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
- Status: NegoPending- InProgress-
- Capabilities: [130 v1] Root Complex Link
- Desc: PortNumber=0f ComponentID=00 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: snd_hda_intel
- 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 00002000-00002fff
- Memory behind bridge: c0000000-c00fffff
- Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0
- ExtTag- RBE+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <16us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
- Address: 00000000 Data: 0000
- Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device c0d8
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: pcieport
- 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
- I/O behind bridge: 0000f000-00000fff
- Memory behind bridge: fff00000-000fffff
- Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0
- ExtTag- RBE+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #2, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- Slot #1, PowerLimit 10.000W; Interlock- NoCompl+
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
- Address: 00000000 Data: 0000
- Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device c0d8
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: pcieport
- 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 23
- Region 0: Memory at c0217000 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Capabilities: [98] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ehci-pci
- 00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=0c <?>
- Kernel driver in use: lpc_ich
- 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 41
- Region 0: I/O ports at 40b0 [size=8]
- Region 1: I/O ports at 40a0 [size=4]
- Region 2: I/O ports at 4090 [size=8]
- Region 3: I/O ports at 4080 [size=4]
- Region 4: I/O ports at 4060 [size=32]
- Region 5: Memory at c0216000 (32-bit, non-prefetchable) [size=2K]
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee2200c Data: 4191
- Capabilities: [70] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
- Capabilities: [b0] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ahci
- 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin C routed to IRQ 11
- Region 0: Memory at c0215000 (64-bit, non-prefetchable) [size=256]
- Region 4: I/O ports at 4040 [size=32]
- 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff) (prog-if ff)
- !!! Unknown header type 7f
- Kernel driver in use: radeon
- 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
- Subsystem: Samsung Electronics Co Ltd Device c0d8
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 44
- Region 0: I/O ports at 2000 [size=256]
- Region 2: Memory at c0004000 (64-bit, prefetchable) [size=4K]
- Region 4: Memory at c0000000 (64-bit, prefetchable) [size=16K]
- Capabilities: [40] Power Management version 3
- Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
- Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
- Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000feeff00c Data: 41c1
- Capabilities: [70] Express (v2) Endpoint, MSI 01
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 512 bytes
- DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us
- ClockPM+ Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported
- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- Compliance De-emphasis: -6dB
- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
- Vector table: BAR=4 offset=00000000
- PBA: BAR=4 offset=00000800
- Capabilities: [d0] Vital Product Data
- Unknown small resource type 00, will not decode more.
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
- Capabilities: [140 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [160 v1] Device Serial Number 01-00-00-00-68-4c-e0-00
- Kernel driver in use: r8169
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement