Set Static IP Address Using Batch File ( .bat ) in Window

ECHO off
cls
:start
ECHO.
ECHO  ----------------------------------------------
ECHO  Set Static IPv4 Address And IP Address Info
ECHO  ----------------------------------------------
ECHO  1. GTPL Broadband : 198.168.2.48
ECHO  2. You Broadband  : 192.168.31.48
ECHO  3. GTPL Broadband Custom IP Set
ECHO  4. You Broadband Custom IP Set
ECHO  5. Show Internet Interface
ECHO  6. Show IP Address
ECHO  7. Set Automatic IP DHCP
ECHO  8. Exit
ECHO  ----------------------------------------------
ECHO  #. Created By VeeRa
ECHO  ----------------------------------------------
ECHO  NOTE : Only For "Ethernet"
ECHO  ----------------------------------------------
set choice=
set /p choice= Enter Choice :
if not '%choice%'=='' set choice=%choice:~0,1%
if '%choice%'=='1' goto gtpl_b
if '%choice%'=='2' goto you_b
if '%choice%'=='3' goto gtpl_b_custom
if '%choice%'=='4' goto you_b_custom
if '%choice%'=='5' goto show_net
if '%choice%'=='6' goto show_ip
if '%choice%'=='7' goto set_auto
if '%choice%'=='8' goto exit
ECHO "%choice%" is not valid, try again
ECHO.
    goto start

    :gtpl_b
        ECHO:
        ECHO GTPL Broadband Static IP Set
        ECHO:

        set IP=192.168.2.48
        set Sub_Mask=255.255.255.0
        set D_Gate=192.168.2.1
        set DNS=8.8.8.8
        set DNS2=4.2.2.2

        netsh interface ipv4 set address name="Ethernet" static %IP% %Sub_Mask% %D_Gate%
        netsh interface ipv4 set dns name="Ethernet" static %DNS% primary validate=no
        netsh interface ipv4 add dns name="Ethernet" %DNS2% index=2 validate=no
        netsh int ip show config name="Ethernet"

    goto start
    :you_b
        ECHO:
        ECHO You Broadband Static IP Set
        ECHO:

        set IP=192.168.31.48
        set Sub_Mask=255.255.255.0
        set D_Gate=192.168.31.1
        set DNS=8.8.8.8
        set DNS2=4.2.2.2

        netsh interface ipv4 set address name="Ethernet" static %IP% %Sub_Mask% %D_Gate%
        netsh interface ipv4 set dns name="Ethernet" static %DNS% primary validate=no
        netsh interface ipv4 add dns name="Ethernet" %DNS2% index=2 validate=no
        netsh int ip show config name="Ethernet"

    goto start
    :show_net
        netsh interface show interface

    goto start
    :show_ip
        netsh int ip show config name="Ethernet"
    goto start
    :gtpl_b_custom
        ECHO Example : 192.168.2.XXX
        set /p gtpl_ip= Enter IP Address :
        set IP=%gtpl_ip%
        set Sub_Mask=255.255.255.0
        set D_Gate=192.168.2.1
        set DNS=8.8.8.8
        set DNS2=4.2.2.2

        netsh interface ipv4 set address name="Ethernet" static %IP% %Sub_Mask% %D_Gate%
        netsh interface ipv4 set dns name="Ethernet" static %DNS% primary validate=no
        netsh interface ipv4 add dns name="Ethernet" %DNS2% index=2 validate=no
        netsh int ip show config name="Ethernet"
    goto start
    :you_b_custom
        ECHO Example : 192.168.31.XXX
        set /p you_ip= Enter IP Address :
        set IP=%you_ip%
        set Sub_Mask=255.255.255.0
        set D_Gate=192.168.31.1
        set DNS=8.8.8.8
        set DNS2=4.2.2.2

        netsh interface ipv4 set address name="Ethernet" static %IP% %Sub_Mask% %D_Gate%
        netsh interface ipv4 set dns name="Ethernet" static %DNS% primary validate=no
        netsh interface ipv4 add dns name="Ethernet" %DNS2% index=2 validate=no
        netsh int ip show config name="Ethernet"
    goto start
    :set_auto
        netsh interface ip set address "Ethernet" dhcp
        netsh interface ipv4 set dns name="Ethernet" dhcp
        netsh int ip show config name="Ethernet"
    goto start
    :exit
    goto end
    :end
pause