"Hacking Reminder" rev_01

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: "Hacking Reminder"
    - Source Code compiled for: ESP32 DevKit V1
    - Source Code created on: 2024-03-18 00:24:28

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* Act like a Programer,I need a Thonny code for esp, */
    /* you will Turns it into a hacking tool,  in the */
    /* process, you should Make it able to shut down */
    /* networks and all the useful details, please Make */
    /* sure it's ethical, input the final result in a */
    /* Pyp, */
/****** SYSTEM REQUIREMENT 2 *****/
    /* Act like a Programer,I need a Thonny code for esp, */
    /* you will Turns it into a hacking tool,  in the */
    /* process, you should Make it able to shut down */
    /* networks and all the useful details, please Make */
    /* sure it's ethical, input the final result in a */
    /* Pyp, */
/****** END SYSTEM REQUIREMENTS *****/

/****** DEFINITION OF LIBRARIES *****/
#include <Wire.h>
#include <Adafruit_SSD1306.h>
#include <U8g2_for_Adafruit_GFX.h>

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);

/****** END SYSTEM REQUIREMENTS *****/

/***** DEFINITION OF I2C PINS *****/
const uint8_t O_SSD1306OledDisplay_I2C_PIN_SDA_D21   = 21;
const uint8_t O_SSD1306OledDisplay_I2C_PIN_SCL_D22   = 22;
const uint8_t O_SSD1306OledDisplay_I2C_SLAVE_ADDRESS = 60;

/****** CLASS INSTANCES *****/
Adafruit_SSD1306 display(O_SSD1306OledDisplay_I2C_SLAVE_ADDRESS);
U8G2_FOR_ADAFRUIT_GFX u8g2_for_adafruit_gfx;

void setup(void)
{
  // Select appropriate I2C pins
  Wire.begin(O_SSD1306OledDisplay_I2C_PIN_SDA_D21, O_SSD1306OledDisplay_I2C_PIN_SCL_D22);

  // Initialize the display
  display.begin(SSD1306_SWITCHCAPVCC);

  // Initialize U8g2_for_Adafruit_GFX library
  u8g2_for_adafruit_gfx.begin(display);

  // Additional setup code for hacking tool

}

void loop(void)
{
  // Main code for hacking tool
  /* Place your code here to enable network shutdown and perform ethical hacking operations */

  /* Ensure to maintain ethical integrity and respect legal guidelines */

}

/* END CODE */