startup

-- credits to:
-- https://youtu.be/sHN-KQKUkaY

-- for an api reference, I use and recommend:
-- http://ftbwiki.org/Reactor_Computer_Port
-- http://ftbwiki.org/Turbine_Computer_Port


local reactor1 = peripheral.wrap("BigReactors-Reactor_1")
local mon = peripheral.wrap("monitor_1")
local turbine1 = peripheral.wrap("BigReactors-Turbine_1")
local turbine2 = peripheral.wrap("BigReactors-Turbine_2")
local turbine3 = peripheral.wrap("BigReactors-Turbine_3")
local turbine4 = peripheral.wrap("BigReactors-Turbine_4")
local capacitor1 = peripheral.wrap("tile_blockcapacitorbank_name_1")
local tspeed = 0

-- basic capacitor low, 10k of 100k capacity
local low = 10000
-- turbine high 80k 1000000 capacity
local high = 80000
-- turbine full at 1M
local full = 1000000

reactor1.setAllControlRodLevels(90)

while true do
-- note the rod percentage is dependant upon blades, rotor material, and number of turbines
-- this number is for 1 80 blade turbine with electrum rotors (37\ blocks)

  if capacitor1.getEnergyStored() <= low then
    reactor1.setAllControlRodLevels(85)
    if reactor1.getActive() == false then
      reactor1.setActive(true)
    end
  end

  if turbine1.getEnergyStored() == full then
     reactor1.setActive(false)
  else
    if turbine1.getEnergyStored() >= high then
      reactor1.setAllControlRodLevels(95)
      reactor1.setActive(true)
    end
  end

  mon.clear()

  mon.setTextScale(1)
  mon.setCursorPos(15,19)
  mon.setTextColor(colors.blue)
  mon.write("pooter stat(os)")

  mon.setCursorPos(1,1)
  mon.setTextColor(colors.white)
  mon.write("Active: ")
  mon.setTextColor(colors.green)
  mon.write(reactor1.getActive())

  mon.setCursorPos(1,2)
  mon.setTextColor(colors.white)
  mon.write("Casing Heat: ")
  mon.setTextColor(colors.green)
  mon.write(math.floor(reactor1.getCasingTemperature()))

  mon.setCursorPos(1,3)
  mon.setTextColor(colors.white)
  mon.write("Fuel Heat: ")
  mon.setTextColor(colors.green)
  mon.write(math.floor(reactor1.getFuelTemperature()))

  mon.setCursorPos(1,4)
  mon.setTextColor(colors.white)
  mon.write("T1-RF: ")
  mon.setTextColor(colors.green)
  mon.write(math.floor(turbine1.getEnergyStored()))

  mon.setCursorPos(1,5)
  mon.setTextColor(colors.white)
  mon.write("C-RF: ")
  mon.setTextColor(colors.green)
  mon.write(math.floor(capacitor1.getEnergyStored()))

  tspeed = math.floor(turbine1.getRotorSpeed())
  mon.setCursorPos(1,6)
  if tspeed>2000 then
    turbine1.setActive(false)
    mon.setTextColor(colors.red)
    sleep(120)
  else
    mon.setTextColor(colors.white)
    turbine1.setActive(true)
  end
  mon.write("T1-RPM: ")
  mon.setTextColor(colors.green)
  mon.write(tspeed)

  mon.setCursorPos(1,7)
  mon.setTextColor(colors.white)
  mon.write("T1-Fin: ")
  mon.setTextColor(colors.green)
  mon.write(math.floor(turbine1.getInputAmount()))

  mon.setCursorPos(1,8)
  mon.setTextColor(colors.white)
  mon.write("T1-Fout: ")
  mon.setTextColor(colors.green)
  mon.write(math.floor(turbine1.getOutputAmount()))

  sleep(10)
end