API tools faq
paste
Advertisement
RobertBerger

poky-1.1-beta-e3c5d7a90ae179a-bb-rev-C2

RobertBerger
Sep 28th, 2011
228
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.94 KB | None | 0 0
raw download clone embed print report
  1. Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
  2. Reading boot sector
  3. Loading u-boot.bin from mmc
  4.  
  5.  
  6. U-Boot 2011.06 (Sep 28 2011 - 02:54:31)
  7.  
  8. OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
  9. OMAP3 Beagle board + LPDDR/NAND
  10. I2C: ready
  11. DRAM: 256 MiB
  12. NAND: 256 MiB
  13. MMC: OMAP SD/MMC: 0
  14. In: serial
  15. Out: serial
  16. Err: serial
  17. Beagle Rev C1/C2/C3
  18. timed out in wait_for_pin: I2C_STAT=0
  19. I2C read: I/O error
  20. Unrecognized expansion board: 0
  21. Die ID #487c00030000000004013f7904018017
  22. Hit any key to stop autoboot: 0
  23. OMAP3 beagleboard.org #
  24. OMAP3 beagleboard.org # sete console "ttyO2,115200n8"
  25. OMAP3 beagleboard.org # sete sd_boot "mmc rescan ${mmcdev}; run loadbootscript; run bootscript; run loaduimage; run mmcboot;"
  26. OMAP3 beagleboard.org #
  27. OMAP3 beagleboard.org # run sd_boot
  28. reading boot.scr
  29.  
  30. ** Unable to read "boot.scr" from mmc 0:1 **
  31. Running bootscript from mmc ...
  32. ## Executing script at 82000000
  33. Wrong image format for "source" command
  34. reading uImage
  35.  
  36. 2809656 bytes read
  37. Booting from mmc ...
  38. ## Booting kernel from Legacy Image at 82000000 ...
  39. Image Name: Linux-2.6.37.6-yocto-standard+
  40. Image Type: ARM Linux Kernel Image (uncompressed)
  41. Data Size: 2809592 Bytes = 2.7 MiB
  42. Load Address: 80008000
  43. Entry Point: 80008000
  44. Verifying Checksum ... OK
  45. Loading Kernel Image ... OK
  46. OK
  47.  
  48. Starting kernel ...
  49.  
  50. Uncompressing Linux... done, booting the kernel.
  51. Initializing cgroup subsys cpuset
  52. Initializing cgroup subsys cpu
  53. Linux version 2.6.37.6-yocto-standard+ (rber@yocto-1) (gcc version 4.6.1 20110627 (prerelease) (GCC) ) #1 PREEMPT Wed Sep 28 01:00:16 EEST 2011
  54. CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  55. CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  56. Machine: OMAP3 Beagle Board
  57. Reserving 12582912 bytes SDRAM for VRAM
  58. Memory policy: ECC disabled, Data cache writeback
  59. OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp )
  60. SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  61. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61952
  62. Kernel command line: console=ttyO2,115200n8 vram=12M omapfb.mode=dvi:1024x768MR-16@60 omapfb.debug=y omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  63. PID hash table entries: 1024 (order: 0, 4096 bytes)
  64. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  65. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  66. allocated 1310720 bytes of page_cgroup
  67. please try 'cgroup_disable=memory' option if you don't want memory cgroups
  68. Memory: 244MB = 244MB total
  69. Memory: 240084k/240084k available, 22060k reserved, 0K highmem
  70. Virtual kernel memory layout:
  71. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  72. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  73. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  74. vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
  75. lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  76. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  77. .init : 0xc0008000 - 0xc0056000 ( 312 kB)
  78. .text : 0xc0056000 - 0xc0573afc (5239 kB)
  79. .data : 0xc0574000 - 0xc05c9700 ( 342 kB)
  80. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  81. Preemptable hierarchical RCU implementation.
  82. NR_IRQS:402
  83. Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
  84. Reprogramming SDRC clock to 332000000 Hz
  85. GPMC revision 5.0
  86. IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  87. Total of 96 interrupts on 1 active controller
  88. OMAP clockevent source: GPTIMER12 at 32768 Hz
  89. Console: colour dummy device 80x30
  90. Calibrating delay loop... 475.76 BogoMIPS (lpj=1855488)
  91. pid_max: default: 32768 minimum: 301
  92. Security Framework initialized
  93. Mount-cache hash table entries: 512
  94. Initializing cgroup subsys debug
  95. Initializing cgroup subsys ns
  96. ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
  97. Initializing cgroup subsys cpuacct
  98. Initializing cgroup subsys memory
  99. Initializing cgroup subsys devices
  100. Initializing cgroup subsys freezer
  101. Initializing cgroup subsys blkio
  102. CPU: Testing write buffer coherency: ok
  103. ftrace: allocating 16422 entries in 33 pages
  104. devtmpfs: initialized
  105. regulator: core version 0.5
  106. regulator: dummy:
  107. NET: Registered protocol family 16
  108. OMAP GPIO hardware version 2.5
  109. OMAP GPIO hardware version 2.5
  110. OMAP GPIO hardware version 2.5
  111. OMAP GPIO hardware version 2.5
  112. OMAP GPIO hardware version 2.5
  113. OMAP GPIO hardware version 2.5
  114. omap_mux_init: Add partition: #1: core, flags: 0
  115. OMAP3 Beagle Rev: C1/C2/C3
  116. Found NAND on CS0
  117. Registering NAND on CS0
  118. Unable to get DVI reset GPIO
  119. OMAP DMA hardware revision 4.0
  120. bio: create slab <bio-0> at 0
  121. SCSI subsystem initialized
  122. usbcore: registered new interface driver usbfs
  123. usbcore: registered new interface driver hub
  124. usbcore: registered new device driver usb
  125. omap_device: omap_i2c.1: new worst case activate latency 0: 30517
  126. omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
  127. twl4030: PIH (irq 7) chaining IRQs 368..375
  128. twl4030: power (irq 373) chaining IRQs 376..383
  129. twl4030: gpio (irq 368) chaining IRQs 384..401
  130. regulator: VUSB1V5: 1500 mV normal standby
  131. regulator: VUSB1V8: 1800 mV normal standby
  132. regulator: VUSB3V1: 3100 mV normal standby
  133. twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  134. regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  135. regulator: VDAC: 1800 mV normal standby
  136. regulator: VDVI: 1800 mV normal standby
  137. regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  138. omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  139. omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz
  140. omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz
  141. Advanced Linux Sound Architecture Driver Version 1.0.23.
  142. Switching to clocksource 32k_counter
  143. musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  144. musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  145. NET: Registered protocol family 2
  146. IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  147. TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  148. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  149. TCP: Hash tables configured (established 8192 bind 8192)
  150. TCP reno registered
  151. UDP hash table entries: 256 (order: 0, 4096 bytes)
  152. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  153. NET: Registered protocol family 1
  154. RPC: Registered udp transport module.
  155. RPC: Registered tcp transport module.
  156. RPC: Registered tcp NFSv4.1 backchannel transport module.
  157. VFS: Disk quotas dquot_6.5.2
  158. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  159. msgmni has been set to 468
  160. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  161. io scheduler noop registered
  162. io scheduler deadline registered
  163. io scheduler cfq registered (default)
  164. OMAP DSS rev 2.0
  165. OMAP DISPC rev 3.0
  166. OMAP VENC rev 2
  167. OMAP DSI rev 1.0
  168. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  169. omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  170. omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  171. omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  172. console [ttyO2] enabled
  173. brd: module loaded
  174. omap2-nand driver initializing
  175. ONFI flash detected
  176. ONFI param page 0 valid
  177. NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
  178. Creating 5 MTD partitions on "omap2-nand.0":
  179. 0x000000000000-0x000000080000 : "X-Loader"
  180. 0x000000080000-0x000000260000 : "U-Boot"
  181. 0x000000260000-0x000000280000 : "U-Boot Env"
  182. 0x000000280000-0x000000680000 : "Kernel"
  183. 0x000000680000-0x000010000000 : "File System"
  184. usbcore: registered new interface driver kaweth
  185. pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
  186. usbcore: registered new interface driver pegasus
  187. usbcore: registered new interface driver asix
  188. usbcore: registered new interface driver cdc_ether
  189. usbcore: registered new interface driver dm9601
  190. usbcore: registered new interface driver smsc75xx
  191. usbcore: registered new interface driver smsc95xx
  192. usbcore: registered new interface driver net1080
  193. usbcore: registered new interface driver cdc_subset
  194. usbcore: registered new interface driver zaurus
  195. usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  196. usbcore: registered new interface driver int51x1
  197. cdc_ncm: 30-Nov-2010
  198. usbcore: registered new interface driver cdc_ncm
  199. console [netcon0] enabled
  200. netconsole: network logging started
  201. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  202. ehci-omap.0 supply hsusb0 not found, using dummy regulator
  203. ehci-omap.0 supply hsusb1 not found, using dummy regulator
  204. ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  205. ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  206. ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  207. ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  208. hub 1-0:1.0: USB hub found
  209. hub 1-0:1.0: 3 ports detected
  210. Initializing USB Mass Storage driver...
  211. usbcore: registered new interface driver usb-storage
  212. USB Mass Storage support registered.
  213. mice: PS/2 mouse device common for all mice
  214. twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  215. twl_rtc twl_rtc: Power up reset detected.
  216. twl_rtc twl_rtc: Enabling TWL-RTC.
  217. omap_device: omap_wdt.-1: new worst case activate latency 0: 30517
  218. OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  219. omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517
  220. cpuidle: using governor ladder
  221. cpuidle: using governor menu
  222. mmci-omap-hs: probe of mmci-omap-hs.1 failed with error -16
  223. usbcore: registered new interface driver usbhid
  224. usbhid: USB HID core driver
  225. OMAP3 Beagle/Devkit8000 SoC init
  226. asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
  227. ALSA device list:
  228. #0: omap3beagle
  229. TCP cubic registered
  230. NET: Registered protocol family 17
  231. Registering the dns_resolver key type
  232. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  233. ThumbEE CPU extension supported.
  234. Power Management for TI OMAP3.
  235. sr_init: No PMIC hook to init smartreflex
  236. smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  237. smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  238. SmartReflex Class3 initialized
  239. clock: disabling unused clocks to save power
  240. registered taskstats version 1
  241. fbcvt: 1024x768@60: CVT Name - .786M3-R
  242. Console: switching to colour frame buffer device 128x48
  243. mmc0: new high speed SDHC card at address 0001
  244. usb 1-2: new high speed USB device using ehci-omap and address 2
  245. mmcblk0: mmc0:0001 00000 7.60 GiB
  246. mmcblk0: p1 p2
  247. regulator_init_complete: incomplete constraints, leaving VDAC on
  248. twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  249. EXT3-fs: barriers not enabled
  250. usb 1-2: applying rev.C fixup
  251. usb 1-2: applying rev.C fixup
  252. MOSCHIP usb-ethernet driver 1-2:1.0: eth0: register 'MOSCHIP usb-ethernet driver' at usb-ehci-omap.0-2, MOSCHIP 7830/7832/7730 usb-NET adapter, 00:60:6e:00:6a:bb
  253. kjournald starting. Commit interval 5 seconds
  254. EXT3-fs (mmcblk0p2): using internal journal
  255. EXT3-fs (mmcblk0p2): recovery complete
  256. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  257. VFS: Mounted root (ext3 filesystem) on device 179:2.
  258. devtmpfs: mounted
  259. Freeing init memory: 312K
  260. INIT: version 2.88 booting
  261. Starting udevudev[67]: starting version 164
  262.  
  263. NET: Registered protocol family 10
  264. Starting Bootlog daemon: bootlogd.
  265.  
  266. Yocto (Built by Poky 5.0) 1.0+snapshot-20110927 beagleboard ttyO2
  267.  
  268. beagleboard login: D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-2zK12uYFH1,guid=0f7ed3be625ebd25aa984c4400000018
  269. gnome-keyring-daemon: Missing argument for --componentsgnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-W28Fz5
  270. SSH_AUTH_SOCK=/tmp/keyring-W28Fz5/ssh
  271. GPG_AGENT_INFO=/tmp/keyring-W28Fz5/gpg:0:1
  272. GNOME_KEYRING_PID=394
  273. GNOME_KEYRING_CONTROL=/tmp/keyring-YfWhi5
  274. SSH_AUTH_SOCK=/tmp/keyring-YfWhi5/ssh
  275. GPG_AGENT_INFO=/tmp/keyring-YfWhi5/gpg:0:1
  276. GNOME_KEYRING_PID=396
  277. gnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-IztRBg
  278. SSH_AUTH_SOCK=/tmp/keyring-IztRBg/ssh
  279. GPG_AGENT_INFO=/tmp/keyring-IztRBg/gpg:0:1
  280. GNOME_KEYRING_PID=401
  281. gnome-keyring-daemon: Missing argument for --componentsGNOME_KEYRING_CONTROL=/tmp/keyring-J8Dcpf
  282. SSH_AUTH_SOCK=/tmp/keyring-J8Dcpf/ssh
  283. GPG_AGENT_INFO=/tmp/keyring-J8Dcpf/gpg:0:1
  284. GNOME_KEYRING_PID=405
  285. [settings daemon] Forking. run with -n to prevent fork
  286. matchbox: Cant find a keycode for keysym 269025056
  287. matchbox: ignoring key shortcut XF86Calendar=!$contacts
  288.  
  289. matchbox: Cant find a keycode for keysym 2809
  290. matchbox: ignoring key shortcut telephone=!$dates
  291.  
  292. matchbox: Cant find a keycode for keysym 269025050
  293. matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
  294.  
  295.  
  296. Yocto (Built by Poky 5.0) 1.0+snapshot-20110927 beagleboard ttyO2
  297.  
  298. beagleboard login:
  299. ** (matchbox-desktop:419): WARNING **: Error loading icon: Icon 'system-file-manager' not present in theme
  300.  
  301. ** (matchbox-desktop:419): WARNING **: Error loading icon: Icon 'preferences-desktop' not present in theme
  302.  
  303. ** (matchbox-desktop:419): WARNING **: Error loading icon: Icon 'computer' not present in theme
  304. root
  305. root@beagleboard:~# ping 192.168.42.100
  306. PING 192.168.42.100 (192.168.42.100): 56 data bytes
  307. 64 bytes from 192.168.42.100: seq=0 ttl=64 time=0.610 ms
  308. 64 bytes from 192.168.42.100: seq=1 ttl=64 time=0.489 ms
  309. 64 bytes from 192.168.42.100: seq=2 ttl=64 time=0.489 ms
  310. 64 bytes from 192.168.42.100: seq=3 ttl=64 time=0.610 ms
  311. 
  312. --- 192.168.42.100 ping statistics ---
  313. 4 packets transmitted, 4 packets received, 0% packet loss
  314. round-trip min/avg/max = 0.489/0.549/0.610 ms
  315.  
  316. root@beagleboard:~#
  317.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!