Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2021.01-g44a87e3ab8 (Apr 18 2022 - 22:20:44 +0000)
- Model: Texas Instruments K3 J721E SoC
- Board: BBONEAI-64-B0- rev B0
- SYSFW ABI: 3.1 (firmware rev 0x0016 '22.1.1--v2022.01 (Terrific Llam')
- Trying to boot from MMC2
- Starting ATF on ARM64 core...
- NOTICE: BL31: v2.5(release):08.01.00.006-dirty
- NOTICE: BL31: Built : 21:21:02, Apr 18 2022
- U-Boot SPL 2021.01-g44a87e3ab8 (Apr 18 2022 - 21:22:46 +0000)
- Model: Texas Instruments K3 J721E SoC
- Board: BBONEAI-64-B0- rev B0
- SYSFW ABI: 3.1 (firmware rev 0x0016 '22.1.1--v2022.01 (Terrific Llam')
- ti_i2c_eeprom_am6_parse_record: Ignoring record id 17
- Trying to boot from MMC2
- U-Boot 2021.01-g44a87e3ab8 (Apr 18 2022 - 21:22:46 +0000)
- SoC: J721E SR1.1
- Model: Texas Instruments K3 J721E SoC
- Board: BBONEAI-64-B0- rev B0
- DRAM: 4 GiB
- Flash: 0 Bytes
- MMC: sdhci@4f80000: 0, sdhci@4fb0000: 1
- In: serial@2800000
- Out: serial@2800000
- Err: serial@2800000
- am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
- i2c_write: error waiting for data ACK (status=0x116)
- pca953x gpio@22: Error reading output register
- Failed to probe device MCASP/TRACE_MUX_S0 err: -121
- i2c_write: error waiting for data ACK (status=0x116)
- pca953x gpio@22: Error reading output register
- Failed to probe device MCASP/TRACE_MUX_S1 err: -121
- initcall sequence 00000000fffc8898 failed at call 0000000080861670 (err=-121)
- ### ERROR ### Please RESET the board ###
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement