U-Boot SPL 2018.03-mainline-student-v2018.03 (May 07 2018 - 11:54:23 +0200)
mmc boot
Trying to boot from MMC1
spl_load_image_fat_os: error reading image system.dtb, err - -2


U-Boot 2018.03-mainline-student-v2018.03 (May 07 2018 - 11:54:23 +0200)

Model: Zynq Zed Development Board
Board: Xilinx Zynq
Silicon: v3.1
DRAM:  ECC disabled 512 MiB
MMC:   sdhci@e0100000: 0
Loading Environment from SPI Flash... SF: unrecognized JEDEC id bytes: 00, 00, 00
*** Warning - spi_flash_probe_bus_cs() failed, using default environment

Failed (-2)
In:    serial@e0001000
Out:   serial@e0001000
Err:   serial@e0001000
Net:   ZYNQ GEM: e000b000, phyaddr 0, interface rgmii-id

Warning: ethernet@e000b000 (eth0) using random MAC address - fe:b2:4a:9c:96:a6
eth0: ethernet@e000b000
2722 bytes read in 15 ms (176.8 KiB/s)
Importing environment from mmc ...
Checking if uenvcmd is set ...
Running uenvcmd ...
bootfile: zedboard/uImage
fdtfile: zedboard/uImage-zynq-zed.dtb
bitstreamfile: zedboard/fpga.bin
ethernet@e000b000 Waiting for PHY auto negotiation to complete...... done
Using ethernet@e000b000 device
host 192.168.42.1 is alive
Using ethernet@e000b000 device
TFTP from server 192.168.42.1; our IP address is 192.168.42.11
Filename 'zedboard/uImage'.
Load address: 0x3000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Booting from nfs...
bootargs=console=ttyPS0,115200n8 ip=192.168.42.11:192.168.42.1:192.168.42.1:255.255.255.0:zedboard::off nfsroot=192.168.42.1:/opt/poky/zedboard-rootfs,v3,tcp noinitrd nohlt panic=1 earlyprintk=ttyPS0,115200n8
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Hit any key to stop autoboot:  0