[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.10.12 (neutrino-images@nisrv) (gcc version 6.3.1 20170109 (crosstool-NG crosstool-ng-1.23.0-36-g1dbb06f2) ) #1 SMP Sun Apr 28 05:23:08 CEST 2019
[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt:Machine model: BCM97251SSV
[    0.000000] cma: Reserved 520 MiB at 0x000000000f800000
[    0.000000] cma: Reserved 200 MiB at 0x0000000030000000
[    0.000000] cma: Failed to reserve 440 MiB
[    0.000000] cma: Failed to reserve 192 MiB
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c09a06c0, node_mem_map cedf4000
[    0.000000]   Normal zone: 1728 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
[    0.000000] percpu: Embedded 14 pages/cpu @cedb5000 s26764 r8192 d22388 u57344
[    0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260416
[    0.000000] Kernel command line: brcm_cma=520M@248M brcm_cma=200M@768M root=/dev/mmcblk0p3 rw rootwait hd51_4.boxmode=12 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200 consoleblank=0 vt.global_cursor_default=0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 289780K/1048576K available (7176K kernel code, 363K rwdata, 1816K rodata, 344K init, 224K bss, 21516K reserved, 737280K cma-reserved, 57344K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc070a5a0   (7178 kB)
[    0.000000]       .init : 0xc0900000 - 0xc0956000   ( 344 kB)
[    0.000000]       .data : 0xc0956000 - 0xc09b0eb8   ( 364 kB)
[    0.000000]        .bss : 0xc09b2000 - 0xc09ea234   ( 225 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
[    0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
[    0.000011] Switching to timer-based delay loop, resolution 37ns
[    0.000290] Console: colour dummy device 80x30
[    0.000313] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[    0.000323] pid_max: default: 32768 minimum: 301
[    0.000431] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000437] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000895] CPU: Testing write buffer coherency: ok
[    0.001150] CPU0: update cpu_capacity 1024
[    0.001155] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001377] Setting up static identity map for 0x8440 - 0x8498
[    0.003399] smp: Bringing up secondary CPUs ...
[    0.004126] CPU1: update cpu_capacity 1024
[    0.004129] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004192] smp: Brought up 1 node, 2 CPUs
[    0.004203] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[    0.004209] CPU: All CPU(s) started in SVC mode.
[    0.004617] devtmpfs: initialized
[    0.010828] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
[    0.011028] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.011043] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.026930] NET: Registered protocol family 16
[    0.027417] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.032442] cpuidle: using governor ladder
[    0.036386] cpuidle: using governor menu
[    0.045851] No ATAGs?
[    0.045951] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.045961] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.060539] SCSI subsystem initialized
[    0.060703] libata version 3.00 loaded.
[    0.060936] usbcore: registered new interface driver usbfs
[    0.060982] usbcore: registered new interface driver hub
[    0.061028] usbcore: registered new device driver usb
[    0.061089] Linux cec interface: v0.10
[    0.061134] Linux video capture interface: v2.00
[    0.061212] pps_core: LinuxPPS API ver. 1 registered
[    0.061217] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.061237] PTP clock support registered
[    0.061944] Advanced Linux Sound Architecture Driver Initialized.
[    0.063343] clocksource: Switched to clocksource arch_sys_counter
[    0.063638] FS-Cache: Loaded
[    0.069731] NET: Registered protocol family 2
[    0.070135] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.070175] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.070248] TCP: Hash tables configured (established 8192 bind 8192)
[    0.070336] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.070361] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.070468] NET: Registered protocol family 1
[    0.070861] RPC: Registered named UNIX socket transport module.
[    0.070867] RPC: Registered udp transport module.
[    0.070870] RPC: Registered tcp transport module.
[    0.070873] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.070881] PCI: CLS 0 bytes, default 64
[    0.071284] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.072734] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.073343] NFS: Registering the id_resolver key type
[    0.073364] Key type id_resolver registered
[    0.073368] Key type id_legacy registered
[    0.073377] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.073382] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.073736] fuse init (API version 7.26)
[    0.075697] bounce: pool size: 64 pages
[    0.075744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.075752] io scheduler noop registered
[    0.075757] io scheduler deadline registered
[    0.075782] io scheduler cfq registered (default)
[    0.076072] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
[    0.076390] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
[    0.076804] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
[    0.077394] brcm-cma brcm-cma.0: Added CMA device @ PA=0xf800000 LEN=0x20800000
[    0.077972] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc800000
[    0.113208] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.114769] console [ttyS0] disabled
[    0.114805] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
[    0.816561] console [ttyS0] enabled
[    0.820661] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
[    0.830021] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
[    0.846413] brd: module loaded
[    0.853314] loop: module loaded
[    0.857344] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
[    0.866521] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
[    0.872606] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
[    0.889843] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
[    0.898827] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
[    0.907972] scsi host0: brcm-ahci
[    0.911569] scsi host1: brcm-ahci
[    0.915062] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
[    0.922995] ata2: DUMMY
[    0.925454] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
[    0.932403] libphy: Fixed MDIO Bus: probed
[    0.936833] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
[    0.954604] libphy: bcmgenet MII bus: probed
[    0.981638] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.987492] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.013409] ehci-brcm: EHCI BRCM driver
[    1.017377] ehci-brcm f0470300.ehci: EHCI Host Controller
[    1.022808] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
[    1.040514] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
[    1.047107] ata1: SATA link down (SStatus 0 SControl 300)
[    1.052612] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
[    1.059126] hub 1-0:1.0: USB hub found
[    1.062922] hub 1-0:1.0: 1 port detected
[    1.067144] ehci-brcm f0470500.ehci: EHCI Host Controller
[    1.072575] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
[    1.090262] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
[    1.102606] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
[    1.108997] hub 2-0:1.0: USB hub found
[    1.112780] hub 2-0:1.0: 1 port detected
[    1.116917] ohci-brcm: OHCI BRCM driver
[    1.120924] ohci-brcm f0470400.ohci: BRCM OHCI controller
[    1.126352] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
[    1.134000] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
[    1.196004] hub 3-0:1.0: USB hub found
[    1.199791] hub 3-0:1.0: 1 port detected
[    1.203950] ohci-brcm f0470600.ohci: BRCM OHCI controller
[    1.209380] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
[    1.217027] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
[    1.278985] hub 4-0:1.0: USB hub found
[    1.282772] hub 4-0:1.0: 1 port detected
[    1.286925] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.293488] ehci-pci: EHCI PCI platform driver
[    1.298003] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.304207] ohci-pci: OHCI PCI platform driver
[    1.309017] xhci-hcd f0471000.xhci: xHCI Host Controller
[    1.314361] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
[    1.322061] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
[    1.330636] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
[    1.337237] hub 5-0:1.0: USB hub found
[    1.341028] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.348297] xhci-hcd f0471000.xhci: xHCI Host Controller
[    1.353635] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
[    1.361180] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.369665] hub 6-0:1.0: USB hub found
[    1.373446] hub 6-0:1.0: 2 ports detected
[    1.377798] usbcore: registered new interface driver uas
[    1.383210] usbcore: registered new interface driver usb-storage
[    1.389313] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[    1.396155] mousedev: PS/2 mouse device common for all mice
[    1.402120] i2c /dev entries driver
[    1.405879] IR NEC protocol handler initialized
[    1.410428] IR RC5(x/sz) protocol handler initialized
[    1.415490] IR RC6 protocol handler initialized
[    1.420049] IR JVC protocol handler initialized
[    1.424588] IR Sony protocol handler initialized
[    1.429217] IR SANYO protocol handler initialized
[    1.433934] IR Sharp protocol handler initialized
[    1.438651] IR MCE Keyboard/mouse protocol handler initialized
[    1.444494] IR XMP protocol handler initialized
[    1.449036] smssdio: Siano SMS1xxx SDIO driver
[    1.453488] smssdio: Copyright Pierre Ossman
[    1.458171] sdhci: Secure Digital Host Controller Interface driver
[    1.464368] sdhci: Copyright(c) Pierre Ossman
[    1.468734] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.477816] hub 1-1:1.0: USB hub found
[    1.481735] hub 1-1:1.0: 4 ports detected
[    1.507611] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[    1.515205] hidraw: raw HID events driver (C) Jiri Kosina
[    1.520814] usbcore: registered new interface driver usbhid
[    1.526407] usbhid: USB HID core driver
[    1.532851] NET: Registered protocol family 17
[    1.537376] Key type dns_resolver registered
[    1.541783] ThumbEE CPU extension supported.
[    1.546073] Registering SWP/SWPB emulation handler
[    1.558496] ALSA device list:
[    1.561512]   No soundcards found.
[    1.565526] Waiting for root device /dev/mmcblk0p3...
[    1.653775] mmc0: new high speed MMC card at address 0001
[    1.659583] mmcblk0: mmc0:0001 4MEYMA 3.66 GiB
[    1.664277] mmcblk0boot0: mmc0:0001 4MEYMA partition 1 2.00 MiB
[    1.670337] mmcblk0boot1: mmc0:0001 4MEYMA partition 2 2.00 MiB
[    1.676414] mmcblk0rpmb: mmc0:0001 4MEYMA partition 3 128 KiB
[    1.685973] Alternate GPT is invalid, using primary GPT.
[    1.691330]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
[    1.703160] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
[    1.774616] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
[    1.874608] usb 1-1.2: new high-speed USB device number 4 using ehci-brcm
[    1.901328] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[    1.907830] scsi host2: usb-storage 1-1.2:1.0
[    1.988606] usb 1-1.3: new full-speed USB device number 5 using ehci-brcm
[    2.327592] random: fast init done
[    2.853168] EXT4-fs (mmcblk0p3): recovery complete
[    2.866800] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.874942] VFS: Mounted root (ext4 filesystem) on device 179:3.
[    2.882180] devtmpfs: mounted
[    2.885549] Freeing unused kernel memory: 344K
[    2.890009] This architecture does not have kernel memory protection.
[    2.914450] scsi 2:0:0:0: Direct-Access     INTENSO  USB              1100 PQ: 0 ANSI: 0 CCS
[    2.923693] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.930393] sd 2:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.87 GiB)
[    2.939246] sd 2:0:0:0: [sda] Write Protect is off
[    2.944067] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[    2.945367] sd 2:0:0:0: [sda] No Caching mode page found
[    2.950714] sd 2:0:0:0: [sda] Assuming drive cache: write through
[    3.180761] hd51_1: loading out-of-tree module taints kernel.
[    3.181944] usbcore: registered new interface driver tpm
[    5.221273] hd51: module_layout: kernel tainted.
[    5.221278] Disabling lock debugging due to kernel taint
[    7.118218] hid-generic 0003:1908:3318.0001: hiddev0,hidraw0: USB HID v2.01 Device [BUILDWIN BL206v1.0.0] on usb-f0470300.ehci-1.3/input0
[    7.191857] usb 1-1.3: USB disconnect, device number 5
[    7.442840] Console: switching to colour frame buffer device 160x45
[    7.745012] input: dreambox remote control (native) as /devices/virtual/input/input0
[    7.745256] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[    7.883138] dvbdev: DVB: registering new adapter (dvb0)
[    7.884037] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-T/T2/C)...
[    8.114625] input: front panel as /devices/virtual/input/input2
[    8.115819] Registered IR keymap rc-cec
[    8.116019] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
[    8.116110] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
[   10.116958] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   10.170754] UDF-fs: warning (device mmcblk0p7): udf_fill_super: No partition found (2)
[   10.191646] UDF-fs: warning (device mmcblk0p7): udf_fill_super: No partition found (2)
[   10.250788] EXT4-fs (mmcblk0p5): recovery complete
[   10.250805] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[   10.289612] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   10.456188] UDF-fs: warning (device mmcblk0p9): udf_fill_super: No partition found (2)
[   10.476186] UDF-fs: warning (device mmcblk0p9): udf_fill_super: No partition found (2)
[   12.153371] usb 1-1.2: USB disconnect, device number 4
[   12.160722] sd 2:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x01 driverbyte=0x00
[   12.160736] sd 2:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[   12.160743] blk_update_request: I/O error, dev sda, sector 0
[   12.160753] Buffer I/O error on dev sda, logical block 0, async page read
[   12.160879]  sda: unable to read partition table
[   12.161484] sd 2:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
[   12.161491] sd 2:0:0:0: [sda] Sense not available.
[   12.161504] sd 2:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[   12.161574] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   12.346621] usb 1-1.2: new high-speed USB device number 6 using ehci-brcm
[   12.884563] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   12.886927] scsi host2: usb-storage 1-1.2:1.0
[   13.922574] scsi 2:0:0:0: Direct-Access     INTENSO  USB              1100 PQ: 0 ANSI: 0 CCS
[   13.923270] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   13.925185] sd 2:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.87 GiB)
[   13.926564] sd 2:0:0:0: [sda] Write Protect is off
[   13.926574] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[   13.927956] sd 2:0:0:0: [sda] No Caching mode page found
[   13.927965] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   15.311624] usb 1-1.3: new full-speed USB device number 7 using ehci-brcm
[   21.364963] hid-generic 0003:1908:3318.0002: hiddev0,hidraw0: USB HID v2.01 Device [BUILDWIN BL206v1.0.0] on usb-f0470300.ehci-1.3/input0
[   21.527988] usb 1-1.3: USB disconnect, device number 7
[   23.129364] usb 1-1.2: USB disconnect, device number 6
[   23.137436] sd 2:0:0:0: [sda] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
[   23.137448] sd 2:0:0:0: [sda] Sense not available.
[   23.137461] sd 2:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B)
[   23.137533] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   23.318624] usb 1-1.2: new high-speed USB device number 8 using ehci-brcm
[   23.858492] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[   23.865991] scsi host2: usb-storage 1-1.2:1.0
[   24.783627] usb 1-1.3: new full-speed USB device number 9 using ehci-brcm
[   24.930570] scsi 2:0:0:0: Direct-Access     INTENSO  USB              1100 PQ: 0 ANSI: 0 CCS
[   24.931168] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   24.933163] sd 2:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.87 GiB)
[   24.934474] sd 2:0:0:0: [sda] Write Protect is off
[   24.934484] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
[   24.935801] sd 2:0:0:0: [sda] No Caching mode page found
[   24.935811] sd 2:0:0:0: [sda] Assuming drive cache: write through
[   24.943041]  sda: sda1
[   24.946521] sd 2:0:0:0: [sda] Attached SCSI removable disk
[   25.371406] UDF-fs: warning (device sda): udf_fill_super: No partition found (2)
[   25.371468] UDF-fs: warning (device sda): udf_fill_super: No partition found (2)
[   25.480948] UDF-fs: warning (device sda): udf_fill_super: No partition found (2)
[   26.535031] random: crng init done
[   26.544694] UDF-fs: warning (device sda): udf_fill_super: No partition found (2)
[   26.654491] UDF-fs: warning (device sda): udf_fill_super: No partition found (2)
[   26.964388] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   31.085607] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
[   31.087343] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
[   32.632116] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   32.731034] hid-generic 0003:1908:3318.0003: hiddev0,hidraw0: USB HID v2.01 Device [BUILDWIN BL206v1.0.0] on usb-f0470300.ehci-1.3/input0
[   32.791864] usb 1-1.3: USB disconnect, device number 9
[   33.460567] usbcore: registered new interface driver cdc_acm
[   33.460575] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   35.953470] NET: Registered protocol family 10
[   35.954510] Segment Routing with IPv6
[   40.655635] usb 1-1.3: new full-speed USB device number 10 using ehci-brcm