Track Time rev_04

/********* Pleasedontcode.com **********

    Pleasedontcode thanks you for automatic code generation! Enjoy your code!

    - Terms and Conditions:
    You have a non-exclusive, revocable, worldwide, royalty-free license
    for personal and commercial use. Attribution is optional; modifications
    are allowed, but you're responsible for code maintenance. We're not
    liable for any loss or damage. For full terms,
    please visit pleasedontcode.com/termsandconditions.

    - Project: Track Time
    - Source Code NOT compiled for: ESP32 DevKit V1
    - Source Code created on: 2024-05-11 22:02:42

********* Pleasedontcode.com **********/

/****** SYSTEM REQUIREMENTS *****/
/****** SYSTEM REQUIREMENT 1 *****/
    /* I need a counter to track seconds upon board is */
    /* switched on. The counter starts at 0 on flashing. */
    /* Counter value to be store in EEPROM when the board */
    /* is powering off. */
/****** SYSTEM REQUIREMENT 2 *****/
    /* At each power on the counter shall be read from */
    /* EEPROM and continue to sum the seconds. */
/****** END SYSTEM REQUIREMENTS *****/


/********* User code review feedback **********
#### Feedback 1 ####
- track minutes, not seconds.
#### Feedback 2 ####
- minutesCounter shall be updated each minute using millis functio
n.
#### Feedback 3 ####
- update of secondsCounter shall be updated with exact increase of
 difference between currentMillis and previousMillis.
********* User code review feedback **********/

/****** DEFINITION OF LIBRARIES *****/
#include <EasyButton.h>  // https://github.com/evert-arias/EasyButton
#include <EEPROM.h>

/****** FUNCTION PROTOTYPES *****/
void setup(void);
void loop(void);
void saveCounterToEEPROM(void);
void powerOff(void);

/***** DEFINITION OF DIGITAL INPUT PINS *****/
const uint8_t button_PushButton_PIN_D4 = 4;

/****** DEFINITION OF LIBRARIES CLASS INSTANCES*****/
// Arduino pin where the button is connected to.
#define BUTTON_PIN 4

// Instance of the button.
EasyButton button(BUTTON_PIN);

// Counter to track seconds
unsigned long secondsCounter = 0;
unsigned long previousMillis = 0; // Variable to store the previous millis value

void onPressedForDuration()
{
  // Code to be executed when the button is pressed for the given duration.
}

void setup()
{
  // put your setup code here, to run once:
  pinMode(button_PushButton_PIN_D4, INPUT_PULLUP);

  // Read the counter value from EEPROM
  EEPROM.begin(sizeof(secondsCounter));
  EEPROM.get(0, secondsCounter);

  // Initialize the button.
  button.begin();
  // Add the callback function to be called when the button is pressed for at least the given time.
  button.onPressedFor(120000, onPressedForDuration); // 120,000 milliseconds = 2 minutes

  // Convert secondsCounter to minutes (assuming each minute is 60 seconds)
  unsigned long minutesCounter = secondsCounter / 60;

  // Update the previousMillis variable
  previousMillis = millis();
}

void loop()
{
  // put your main code here, to run repeatedly:
  // Continuously read the status of the button.
  button.read();

  // Update the seconds counter using millis function
  unsigned long currentMillis = millis();
  unsigned long elapsedTime = currentMillis - previousMillis;
  if (elapsedTime >= 1000) {
    secondsCounter += (elapsedTime / 1000); // Update secondsCounter with the exact increase
    previousMillis = currentMillis;
  }

  // Update the minutes counter
  unsigned long minutesCounter = secondsCounter / 60;

  if (secondsCounter % 60 == 0) {
    minutesCounter++;
  }

  // Save the counter value to EEPROM every minute
  if (secondsCounter % 60 == 0) {
    saveCounterToEEPROM();
  }
}

void saveCounterToEEPROM()
{
  // Save the counter value to EEPROM
  EEPROM.put(0, secondsCounter);
  EEPROM.commit();
}

void powerOff()
{
  // Call the function to save the counter value to EEPROM
  saveCounterToEEPROM();

  // Power off the board
}