API tools faq
paste
Advertisement
RobertBerger

phytec_1

RobertBerger
Jun 28th, 2015
517
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.28 KB | None | 0 0
raw download clone embed print report
  1. barebox 2015.02.0-AM335x-PD15.1.1-dirty #1 Fri Jun 5 11:53:04 CEST 2015
  2.  
  3.  
  4. Board: Phytec phyCORE AM335x
  5. omap-hsmmc 48060000.mmc: registered as 48060000.mmc
  6. booting from MMC
  7. mmc0: detected SD card version 2.0
  8. mmc0: registered mmc0
  9.  
  10.  
  11. barebox 2015.02.0-AM335x-PD15.1.1-dirty #1 Fri Jun 5 11:53:23 CEST 2015
  12.  
  13.  
  14. Board: Phytec phyCORE AM335x
  15. cpsw 4a100000.ethernet: detected phy mask 0x3
  16. mdio_bus: miibus0: probed
  17. eth0: got preset MAC address: 20:cd:39:f6:b6:3c
  18. am335x-phy-driver 47401b00.usb-phy: am_usbphy 87f1fac0 enabled
  19. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  20. musb-hdrc: MHDRC RTL version 2.0
  21. musb-hdrc: setup fifo_mode 4
  22. musb-hdrc: 28/31 max ep, 16384/16384 memory
  23. i2c-omap 44e0b000.i2c: bus -1 rev0.11 at 400 kHz
  24. omap-hsmmc 48060000.mmc: registered as 48060000.mmc
  25. mmc0: detected SD card version 2.0
  26. mmc0: registered mmc0
  27. nand: ONFI param page 0 valid
  28. nand: ONFI flash detected
  29. nand: NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABADAH4), 128MiB, page size: 2048, OOB size: 64
  30. netconsole: registered as netconsole-1
  31. malloc space: 0x87f00000 -> 0x8fdfffff (size 127 MiB)
  32. environment load /boot/barebox.env: No such file or directory
  33. Maybe you have to create the partition.
  34. running /env/bin/init...
  35.  
  36. Hit m for menu or any other key to stop autoboot: 0
  37. blspec: blspec_scan_directory: mmc loader/entries
  38.  
  39. Loading ARM Linux zImage '/boot/linuximage'
  40. Loading devicetree from '/boot/oftree'
  41. commandline: console=ttyO0,115200n8 consoleblank=0 root=/dev/mmcblk0p2 rootwait rw video=HDMI-A-1:1024x768-32@60
  42. [ 0.000000] Booting Linux on physical CPU 0x0
  43. [ 0.000000] Linux version 3.12.30-AM335x-PD15.1.1 (mueller-klieser@augenblix) (gcc version 4.9.1 (GCC) ) #1 SMP Fri Jun 5 11:55:14 CEST 2015
  44. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  45. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  46. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: Phytec AM335x phyBOARD-WEGA
  47. [ 0.000000] cma: CMA: reserved 24 MiB at 8e000000
  48. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  49. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  50. [ 0.000000] AM335X ES2.1 (sgx neon )
  51. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b64000 s9024 r8192 d15552 u32768
  52. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64256
  53. [ 0.000000] Kernel command line: console=ttyO0,115200n8 consoleblank=0 root=/dev/mmcblk0p2 rootwait rw video=HDMI-A-1:1024x768-32@60
  54. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  55. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  56. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  57. [ 0.000000] Memory: 222488K/259072K available (6211K kernel code, 579K rwdata, 2048K rodata, 396K init, 258K bss, 36584K reserved, 0K highmem)
  58. [ 0.000000] Virtual kernel memory layout:
  59. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  60. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  61. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  62. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  63. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  64. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  65. [ 0.000000] .text : 0xc0008000 - 0xc081904c (8261 kB)
  66. [ 0.000000] .init : 0xc081a000 - 0xc087d340 ( 397 kB)
  67. [ 0.000000] .data : 0xc087e000 - 0xc090edc8 ( 580 kB)
  68. [ 0.000000] .bss : 0xc090edd0 - 0xc094f954 ( 259 kB)
  69. [ 0.000000] Hierarchical RCU implementation.
  70. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  71. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  72. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  73. [ 0.000000] Total of 128 interrupts on 1 active controller
  74. [ 0.000000] OMAP clockevent source: timer2 at 25000000 Hz
  75. [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
  76. [ 0.000000] OMAP clocksource: timer1 at 25000000 Hz
  77. [ 0.000000] Console: colour dummy device 80x30
  78. [ 0.000427] Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
  79. [ 0.049606] pid_max: default: 32768 minimum: 301
  80. [ 0.049769] Security Framework initialized
  81. [ 0.049853] Mount-cache hash table entries: 512
  82. [ 0.064515] CPU: Testing write buffer coherency: ok
  83. [ 0.065035] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  84. [ 0.065113] Setting up static identity map for 0xc0616c70 - 0xc0616ce0
  85. [ 0.066167] Brought up 1 CPUs
  86. [ 0.066184] SMP: Total of 1 processors activated.
  87. [ 0.066195] CPU: All CPU(s) started in SVC mode.
  88. [ 0.067080] devtmpfs: initialized
  89. [ 0.072785] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  90. [ 0.141432] omap_hwmod: debugss: _wait_target_disable failed
  91. [ 0.142421] pinctrl core: initialized pinctrl subsystem
  92. [ 0.143730] regulator-dummy: no parameters
  93. [ 0.146581] NET: Registered protocol family 16
  94. [ 0.149982] DMA: preallocated 256 KiB pool for atomic coherent allocations
  95. [ 0.154297] cpuidle: using governor ladder
  96. [ 0.154323] cpuidle: using governor menu
  97. [ 0.165630] platform mpu.2: FIXME: clock-name 'fck' DOES NOT exist in dt!
  98. [ 0.167365] platform 49000000.edma: FIXME: clock-name 'fck' DOES NOT exist in dt!
  99. [ 0.169261] OMAP GPIO hardware version 0.1
  100. [ 0.184473] omap-gpmc 50000000.gpmc: could not find pctldev for node /pinmux@44e10800/pinmux_nandflash, deferring probe
  101. [ 0.184520] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral
  102. [ 0.185133] platform 56000000.sgx: FIXME: clock-name 'fck' DOES NOT exist in dt!
  103. [ 0.190623] DSS not supported on this SoC
  104. [ 0.190649] No ATAGs?
  105. [ 0.190664] hw-breakpoint: debug architecture 0x4 unsupported.
  106. [ 0.193389] cpsw.1: No hwaddr in dt. Using 20:cd:39:f6:b6:3e from efuse
  107. [ 0.239079] bio: create slab <bio-0> at 0
  108. [ 0.265216] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  109. [ 0.266506] vcc5v: 5000 mV
  110. [ 0.267076] vcc3v3: 3300 mV
  111. [ 0.267578] lcd_3v3: 3300 mV
  112. [ 0.274101] SCSI subsystem initialized
  113. [ 0.276284] usbcore: registered new interface driver usbfs
  114. [ 0.276571] usbcore: registered new interface driver hub
  115. [ 0.276921] usbcore: registered new device driver usb
  116. [ 0.278421] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0, deferring probe
  117. [ 0.278460] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral
  118. [ 0.278837] media: Linux media interface: v0.10
  119. [ 0.279114] Linux video capture interface: v2.00
  120. [ 0.279863] pps_core: LinuxPPS API ver. 1 registered
  121. [ 0.279880] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  122. [ 0.280392] PTP clock support registered
  123. [ 0.285033] Switched to clocksource timer1
  124. [ 0.317625] NET: Registered protocol family 2
  125. [ 0.318865] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  126. [ 0.318935] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  127. [ 0.318992] TCP: Hash tables configured (established 2048 bind 2048)
  128. [ 0.319085] TCP: reno registered
  129. [ 0.319105] UDP hash table entries: 256 (order: 1, 8192 bytes)
  130. [ 0.319137] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  131. [ 0.319453] NET: Registered protocol family 1
  132. [ 0.319987] RPC: Registered named UNIX socket transport module.
  133. [ 0.320006] RPC: Registered udp transport module.
  134. [ 0.320016] RPC: Registered tcp transport module.
  135. [ 0.320028] RPC: Registered tcp NFSv4.1 backchannel transport module.
  136. [ 0.320551] NetWinder Floating Point Emulator V0.97 (double precision)
  137. [ 0.320714] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  138. [ 0.321748] PM: Loading am335x-pm-firmware.bin
  139. [ 0.519727] VFS: Disk quotas dquot_6.5.2
  140. [ 0.519937] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  141. [ 0.520943] NFS: Registering the id_resolver key type
  142. [ 0.521058] Key type id_resolver registered
  143. [ 0.521073] Key type id_legacy registered
  144. [ 0.521126] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  145. [ 0.521974] msgmni has been set to 482
  146. [ 0.524760] NET: Registered protocol family 38
  147. [ 0.524834] io scheduler noop registered
  148. [ 0.524848] io scheduler deadline registered
  149. [ 0.524884] io scheduler cfq registered (default)
  150. [ 0.528048] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  151. [ 0.536827] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  152. [ 0.540979] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
  153. [ 1.204298] console [ttyO0] enabled
  154. [ 1.210037] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1
  155. [ 1.221953] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
  156. [ 1.229822] [drm] Initialized drm 1.1.0 20060810
  157. [ 1.252244] brd: module loaded
  158. [ 1.264679] loop: module loaded
  159. [ 1.274522] mtdoops: mtd device (mtddev=name/number) must be supplied
  160. [ 1.284572] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
  161. [ 1.292289] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
  162. [ 1.300246] m25p80 spi1.0: found mr25h256, expected m25p80
  163. [ 1.306197] m25p80 spi1.0: mr25h256 (32 Kbytes)
  164. [ 1.319187] CAN device driver interface
  165. [ 1.325323] c_can_platform 481d0000.d_can: c_can_platform device registered (regs=fa1d0000, irq=71)
  166. [ 1.337921] usbcore: registered new interface driver asix
  167. [ 1.343937] usbcore: registered new interface driver ax88179_178a
  168. [ 1.351150] usbcore: registered new interface driver cdc_ether
  169. [ 1.357895] usbcore: registered new interface driver r815x
  170. [ 1.364005] usbcore: registered new interface driver smsc95xx
  171. [ 1.370383] usbcore: registered new interface driver net1080
  172. [ 1.376681] usbcore: registered new interface driver cdc_subset
  173. [ 1.383165] usbcore: registered new interface driver zaurus
  174. [ 1.389471] usbcore: registered new interface driver cdc_ncm
  175. [ 1.396330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  176. [ 1.403198] ehci-pci: EHCI PCI platform driver
  177. [ 1.408528] usbcore: registered new interface driver cdc_wdm
  178. [ 1.414814] usbcore: registered new interface driver usb-storage
  179. [ 1.426865] musb-hdrc musb-hdrc.0.auto: Enabled SW babble control
  180. [ 1.433425] musb-hdrc musb-hdrc.0.auto: Falied to request rx1.
  181. [ 1.439963] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517
  182. [ 1.448346] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral
  183. [ 1.458850] musb-hdrc musb-hdrc.1.auto: Enabled SW babble control
  184. [ 1.465558] musb-hdrc musb-hdrc.1.auto: Falied to request rx1.
  185. [ 1.471749] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517
  186. [ 1.480054] platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral
  187. [ 1.510883] mousedev: PS/2 mouse device common for all mice
  188. [ 1.521679] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc1
  189. [ 1.532276] i2c /dev entries driver
  190. [ 1.537376] Driver for 1-wire Dallas network protocol.
  191. [ 1.547042] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  192. [ 1.557084] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  193. [ 1.564281] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  194. [ 1.612273] ledtrig-cpu: registered to indicate activity on CPUs
  195. [ 1.622347] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
  196. [ 1.629719] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
  197. [ 1.637954] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
  198. [ 1.644048] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
  199. [ 1.651418] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
  200. [ 1.661085] usbcore: registered new interface driver usbhid
  201. [ 1.667052] usbhid: USB HID core driver
  202. [ 1.676318] oprofile: using arm/armv7
  203. [ 1.680290] mmc0: host does not support reading read-only switch. assuming write-enable.
  204. [ 1.689535] TCP: cubic registered
  205. [ 1.693042] Initializing XFRM netlink socket
  206. [ 1.697826] NET: Registered protocol family 17
  207. [ 1.702673] mmc0: new high speed SDHC card at address 59b4
  208. [ 1.708618] NET: Registered protocol family 15
  209. [ 1.713310] can: controller area network core (rev 20120528 abi 9)
  210. [ 1.720882] mmcblk0: mmc0:59b4 USD 3.74 GiB
  211. [ 1.726931] NET: Registered protocol family 29
  212. [ 1.731800] mmcblk0: p1 p2
  213. [ 1.735446] 8021q: 802.1Q VLAN Support v1.8
  214. [ 1.739985] Key type dns_resolver registered
  215. [ 1.746791] cpu cpu0: cpu0 regulator not ready, retry
  216. [ 1.752160] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral
  217. [ 1.760871] ThumbEE CPU extension supported.
  218. [ 1.765571] Registering SWP/SWPB emulation handler
  219. [ 1.772604] lcd_3v3: disabling
  220. [ 1.775942] vcc5v: disabling
  221. [ 1.778974] regulator-dummy: disabling
  222. [ 1.784026] Error: Driver 'tfp410' is already registered, aborting...
  223. [ 1.791417] slave hdmi.8: could not get i2c
  224. [ 1.796110] platform hdmi.8: Driver slave requests probe deferral
  225. [ 1.803525] platform 4830e000.lcdc: Driver tilcdc requests probe deferral
  226. [ 1.811616] omap-gpmc 50000000.gpmc: GPMC revision 6.0
  227. [ 1.817139] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
  228. [ 1.824887] ONFI param page 0 valid
  229. [ 1.828706] ONFI flash detected
  230. [ 1.832038] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABADAH4), 128MiB, page size: 2048, OOB size: 64
  231. [ 1.844088] omap2-nand: detected x8 NAND flash
  232. [ 1.848818] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
  233. [ 1.854470] omap2-nand: using custom ecc layout
  234. [ 1.859554] 9 ofpart partitions found on MTD device omap2-nand.0
  235. [ 1.865985] Creating 9 MTD partitions on "omap2-nand.0":
  236. [ 1.871628] 0x000000000000-0x000000020000 : "xload"
  237. [ 1.879367] 0x000000020000-0x000000040000 : "xload_backup1"
  238. [ 1.887709] 0x000000040000-0x000000060000 : "xload_backup2"
  239. [ 1.896064] 0x000000060000-0x000000080000 : "xload_backup3"
  240. [ 1.904143] 0x000000080000-0x000000100000 : "barebox"
  241. [ 1.912186] 0x000000100000-0x000000140000 : "bareboxenv"
  242. [ 1.920519] 0x000000140000-0x000000180000 : "oftree"
  243. [ 1.928383] 0x000000180000-0x000000980000 : "kernel"
  244. [ 1.942706] 0x000000980000-0x000008000000 : "root"
  245. [ 2.052081] tps65910 0-002d: No interrupt support, no core IRQ
  246. [ 2.061013] vrtc: 1800 mV
  247. [ 2.064213] vrtc: supplied by vcc5v
  248. [ 2.069897] vio: at 1500 mV
  249. [ 2.073040] vio: supplied by vcc5v
  250. [ 2.078935] vdd_mpu: 912 <--> 1375 mV at 1287 mV
  251. [ 2.083997] vdd_mpu: supplied by vcc5v
  252. [ 2.090299] vdd_core: 912 <--> 1150 mV at 1100 mV
  253. [ 2.095559] vdd_core: supplied by vcc5v
  254. [ 2.100801] vdd3: 5000 mV
  255. [ 2.105376] vdig1_1p8v: 1800 mV
  256. [ 2.108883] vdig1_1p8v: supplied by vcc5v
  257. [ 2.114698] vdig2: at 1800 mV
  258. [ 2.118114] vdig2: supplied by vcc5v
  259. [ 2.123464] vpll: at 1800 mV
  260. [ 2.126793] vpll: supplied by vcc5v
  261. [ 2.132072] vdac: at 1800 mV
  262. [ 2.135431] vdac: supplied by vcc5v
  263. [ 2.140673] vaux1: at 1800 mV
  264. [ 2.143962] vaux1: supplied by vcc5v
  265. [ 2.149408] vaux2: at 3300 mV
  266. [ 2.152728] vaux2: supplied by vcc5v
  267. [ 2.158134] vaux33: at 3300 mV
  268. [ 2.161527] vaux33: supplied by vcc5v
  269. [ 2.167058] vmmc: 1800 <--> 3300 mV at 3300 mV
  270. [ 2.171922] vmmc: supplied by vcc5v
  271. [ 2.177446] tps65910-rtc tps65910-rtc: IRQ is not free.
  272. [ 2.182992] tps65910-rtc: probe of tps65910-rtc failed with error -22
  273. [ 2.191294] at24 0-0052: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
  274. [ 2.199369] rtc-m41t80 0-0068: chip found, driver version 0.05
  275. [ 2.206609] rtc-m41t80 0-0068: rtc core: registered rv4162c7 as rtc0
  276. [ 2.214545] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  277. [ 2.221327] musb-hdrc musb-hdrc.0.auto: Enabled SW babble control
  278. [ 2.230441] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
  279. [ 2.237242] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
  280. [ 2.245934] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  281. [ 2.253106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  282. [ 2.260791] usb usb1: Product: MUSB HDRC host driver
  283. [ 2.266060] usb usb1: Manufacturer: Linux 3.12.30-AM335x-PD15.1.1 musb-hcd
  284. [ 2.273315] usb usb1: SerialNumber: musb-hdrc.0.auto
  285. [ 2.279938] hub 1-0:1.0: USB hub found
  286. [ 2.283978] hub 1-0:1.0: 1 port detected
  287. [ 2.289778] musb-hdrc musb-hdrc.1.auto: Enabled SW babble control
  288. [ 2.298859] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  289. [ 2.305680] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2
  290. [ 2.314240] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  291. [ 2.321495] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  292. [ 2.329170] usb usb2: Product: MUSB HDRC host driver
  293. [ 2.334412] usb usb2: Manufacturer: Linux 3.12.30-AM335x-PD15.1.1 musb-hcd
  294. [ 2.341691] usb usb2: SerialNumber: musb-hdrc.1.auto
  295. [ 2.348274] hub 2-0:1.0: USB hub found
  296. [ 2.352314] hub 2-0:1.0: 1 port detected
  297. [ 2.477754] tilcdc 4830e000.lcdc: found TDA19988
  298. [ 2.483706] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  299. [ 2.490721] [drm] No driver support for vblank timestamp query.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!