API tools faq
paste
Advertisement
baruchiro

smartctl --all /dev/sda2

baruchiro
Oct 13th, 2019
142
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 8.18 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.0.0-31-generic] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Marvell based SanDisk SSDs
  6. Device Model:     SanDisk Ultra II 480GB
  7. Serial Number:    160420444652
  8. Firmware Version: X41100RL
  9. User Capacity:    480,103,981,056 bytes [480 GB]
  10. Sector Size:      512 bytes logical/physical
  11. Rotation Rate:    Solid State Device
  12. Form Factor:      2.5 inches
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ACS-2 T13/2015-D revision 3
  15. SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 1.5 Gb/s)
  16. Local Time is:    Sun Oct 13 09:53:56 2019 IDT
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x00) Offline data collection activity
  25.                     was never started.
  26.                     Auto Offline Data Collection: Disabled.
  27. Self-test execution status:      ( 112) The previous self-test completed having
  28.                     the read element of the test failed.
  29. Total time to complete Offline
  30. data collection:        (    0) seconds.
  31. Offline data collection
  32. capabilities:            (0x11) SMART execute Offline immediate.
  33.                     No Auto Offline data collection support.
  34.                     Suspend Offline collection upon new
  35.                     command.
  36.                     No Offline surface scan supported.
  37.                     Self-test supported.
  38.                     No Conveyance Self-test supported.
  39.                     No Selective Self-test supported.
  40. SMART capabilities:            (0x0003) Saves SMART data before entering
  41.                     power-saving mode.
  42.                     Supports SMART auto save timer.
  43. Error logging capability:        (0x01) Error logging supported.
  44.                     General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time:    (   2) minutes.
  47. Extended self-test routine
  48. recommended polling time:    (  10) minutes.
  49.  
  50. SMART Attributes Data Structure revision number: 4
  51. Vendor Specific SMART Attributes with Thresholds:
  52. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  53.   5 Reallocated_Sector_Ct   0x0032   100   100   ---    Old_age   Always       -       3
  54.   9 Power_On_Hours          0x0032   100   100   ---    Old_age   Always       -       8913
  55.  12 Power_Cycle_Count       0x0032   100   100   ---    Old_age   Always       -       2791
  56. 165 Total_Write/Erase_Count 0x0032   100   100   ---    Old_age   Always       -       292134650864
  57. 166 Min_W/E_Cycle           0x0032   100   100   ---    Old_age   Always       -       2
  58. 167 Min_Bad_Block/Die       0x0032   100   100   ---    Old_age   Always       -       52
  59. 168 Maximum_Erase_Cycle     0x0032   100   100   ---    Old_age   Always       -       32
  60. 169 Total_Bad_Block         0x0032   100   100   ---    Old_age   Always       -       548
  61. 170 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       3
  62. 171 Program_Fail_Count      0x0032   100   100   ---    Old_age   Always       -       0
  63. 172 Erase_Fail_Count        0x0032   100   100   ---    Old_age   Always       -       0
  64. 173 Avg_Write/Erase_Count   0x0032   100   100   ---    Old_age   Always       -       17
  65. 174 Unexpect_Power_Loss_Ct  0x0032   100   100   ---    Old_age   Always       -       149
  66. 184 End-to-End_Error        0x0032   100   100   ---    Old_age   Always       -       0
  67. 187 Reported_Uncorrect      0x0032   100   100   ---    Old_age   Always       -       65535
  68. 188 Command_Timeout         0x0032   100   100   ---    Old_age   Always       -       0
  69. 194 Temperature_Celsius     0x0022   071   065   ---    Old_age   Always       -       29 (Min/Max 13/65)
  70. 199 SATA_CRC_Error          0x0032   100   100   ---    Old_age   Always       -       0
  71. 230 Perc_Write/Erase_Count  0x0032   100   100   ---    Old_age   Always       -       2577016685144
  72. 232 Perc_Avail_Resrvd_Space 0x0033   100   100   004    Pre-fail  Always       -       100
  73. 233 Total_NAND_Writes_GiB   0x0032   100   100   ---    Old_age   Always       -       8254
  74. 234 Perc_Write/Erase_Ct_BC  0x0032   100   100   ---    Old_age   Always       -       20654
  75. 241 Total_Writes_GiB        0x0030   253   253   ---    Old_age   Offline      -       17137
  76. 242 Total_Reads_GiB         0x0030   253   253   ---    Old_age   Offline      -       24685
  77. 244 Thermal_Throttle        0x0032   000   100   ---    Old_age   Always       -       0
  78.  
  79. SMART Error Log Version: 1
  80. Warning: ATA error count 65535 inconsistent with error log pointer 2
  81.  
  82. ATA Error Count: 65535 (device log contains only the most recent five errors)
  83.     CR = Command Register [HEX]
  84.     FR = Features Register [HEX]
  85.     SC = Sector Count Register [HEX]
  86.     SN = Sector Number Register [HEX]
  87.     CL = Cylinder Low Register [HEX]
  88.     CH = Cylinder High Register [HEX]
  89.     DH = Device/Head Register [HEX]
  90.     DC = Device Command Register [HEX]
  91.     ER = Error register [HEX]
  92.     ST = Status register [HEX]
  93. Powered_Up_Time is measured from power on, and printed as
  94. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  95. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  96.  
  97. Error 65535 occurred at disk power-on lifetime: 6971 hours (290 days + 11 hours)
  98.   When the command that caused the error occurred, the device was active or idle.
  99.  
  100.   After command completion occurred, registers were:
  101.   ER ST SC SN CL CH DH
  102.   -- -- -- -- -- -- --
  103.   41 40 00 00 00 00 00
  104.  
  105.   Commands leading to the command that caused the error were:
  106.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  107.   -- -- -- -- -- -- -- --  ----------------  --------------------
  108.   60 00 28 a8 4b 5d 40 00      00:00:00.000  READ FPDMA QUEUED
  109.  
  110. Error 65534 occurred at disk power-on lifetime: 6971 hours (290 days + 11 hours)
  111.   When the command that caused the error occurred, the device was active or idle.
  112.  
  113.   After command completion occurred, registers were:
  114.   ER ST SC SN CL CH DH
  115.   -- -- -- -- -- -- --
  116.   41 40 00 00 00 00 00
  117.  
  118.   Commands leading to the command that caused the error were:
  119.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  120.   -- -- -- -- -- -- -- --  ----------------  --------------------
  121.   60 00 20 90 de 5c 40 00      00:00:00.000  READ FPDMA QUEUED
  122.  
  123. Error 65533 occurred at disk power-on lifetime: 6971 hours (290 days + 11 hours)
  124.   When the command that caused the error occurred, the device was active or idle.
  125.  
  126.   After command completion occurred, registers were:
  127.   ER ST SC SN CL CH DH
  128.   -- -- -- -- -- -- --
  129.   41 40 00 00 00 00 00
  130.  
  131.   Commands leading to the command that caused the error were:
  132.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  133.   -- -- -- -- -- -- -- --  ----------------  --------------------
  134.   60 00 00 68 e4 5c 40 00      00:00:00.000  READ FPDMA QUEUED
  135.  
  136. Error 65532 occurred at disk power-on lifetime: 6971 hours (290 days + 11 hours)
  137.   When the command that caused the error occurred, the device was active or idle.
  138.  
  139.   After command completion occurred, registers were:
  140.   ER ST SC SN CL CH DH
  141.   -- -- -- -- -- -- --
  142.   41 40 00 00 00 00 00
  143.  
  144.   Commands leading to the command that caused the error were:
  145.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  146.   -- -- -- -- -- -- -- --  ----------------  --------------------
  147.   60 08 58 18 4d d7 40 00      00:00:00.000  READ FPDMA QUEUED
  148.  
  149. Error 65531 occurred at disk power-on lifetime: 6971 hours (290 days + 11 hours)
  150.   When the command that caused the error occurred, the device was active or idle.
  151.  
  152.   After command completion occurred, registers were:
  153.   ER ST SC SN CL CH DH
  154.   -- -- -- -- -- -- --
  155.   41 40 00 00 00 00 00
  156.  
  157.   Commands leading to the command that caused the error were:
  158.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  159.   -- -- -- -- -- -- -- --  ----------------  --------------------
  160.   60 08 50 18 4d d7 40 00      00:00:00.000  READ FPDMA QUEUED
  161.  
  162. SMART Self-test log structure revision number 1
  163. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  164. # 1  Short offline       Completed: read failure       00%      8912         883518784
  165. # 2  Extended offline    Completed: read failure       00%      8912         527564080
  166.  
  167. Selective Self-tests/Logging not supported
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!