3.4.4-stable-no-fdt-1

U-Boot SPL 2012.04.01-mainline-jenkinsuser1-v2012.04.01 (Jul 01 2012 - 16:00:04)
Texas Instruments Revision detection unimplemented
OMAP SD/MMC: 0
timed out in wait_for_bb: I2C_STAT=1000
reading u-boot.img
reading u-boot.img


U-Boot 2012.04.01-mainline-jenkinsuser1-v2012.04.01 (Jul 01 2012 - 16:00:04)

OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment

In:    serial
Out:   serial
Err:   serial
Beagle xM Rev C
No EEPROM on expansion board
Die ID #190000029ff80000016830100f03801b
Net:   Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot:  0
gpio: pin 173 (gpio 173) value is 0
gpio: pin 4 (gpio 4) value is 0
SD/MMC found on device 0
reading uEnv.txt

** Unable to read "uEnv.txt" from mmc 0:1 **
Loading file "/boot/uImage" from mmc device 0:2 (xxa2)
3239056 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
   Image Name:   Linux-3.4.4-custom-jenkinsuser1
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3238992 Bytes = 3.1 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.4-custom-jenkinsuser1 (jenkinsuser1@jenkins-slave-1) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #2 PREEMPT Mon Jul 2 00:32:37 EEST 2012
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: OMAP3 Beagle Board
Reserving 12582912 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 126720
Kernel command line: console=ttyO2,115200n8 mpurate=auto buddy=none camera=none vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 1048576 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 499MB = 499MB total
Memory: 497716k/497716k available, 26572k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc0627424   (6270 kB)
      .init : 0xc0628000 - 0xc067e000   ( 344 kB)
      .data : 0xc067e000 - 0xc06ed830   ( 447 kB)
       .bss : 0xc06ed854 - 0xc0784c3c   ( 605 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:474
IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
Total of 96 interrupts on 1 active controller
OMAP clockevent source: GPTIMER12 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
Console: colour dummy device 80x30
Calibrating delay loop... 456.86 BogoMIPS (lpj=1781760)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
ftrace: allocating 18312 entries in 54 pages
Setting up static identity map for 0x80452940 - 0x80452998
devtmpfs: initialized
dummy:
NET: Registered protocol family 16
GPMC revision 5.0
gpiochip_add: registered GPIOs 0 to 31 on device: gpio
OMAP GPIO hardware version 2.5
gpiochip_add: registered GPIOs 32 to 63 on device: gpio
gpiochip_add: registered GPIOs 64 to 95 on device: gpio
gpiochip_add: registered GPIOs 96 to 127 on device: gpio
gpiochip_add: registered GPIOs 128 to 159 on device: gpio
gpiochip_add: registered GPIOs 160 to 191 on device: gpio
omap_mux_init: Add partition: #1: core, flags: 0
OMAP3 Beagle Rev: xM C
Reprogramming SDRC clock to 400000000 Hz
dpll3_m2_clk rate change failed: -22
 usbhs_omap: alias fck already exists
Found NAND on CS0
Registering NAND on CS0
Unable to get DVI reset GPIO
 omap-mcbsp.2: alias fck already exists
 omap-mcbsp.3: alias fck already exists
OMAP DMA hardware revision 5.0
bio: create slab <bio-0> at 0
SCSI subsystem initialized
omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated
omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated
omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated
omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
twl 1-0048: PIH (irq 7) chaining IRQs 320..328
twl 1-0048: power (irq 325) chaining IRQs 328..335
twl4030_gpio twl4030_gpio: gpio (irq 320) chaining IRQs 336..353
gpiochip_add: registered GPIOs 192 to 211 on device: twl4030
VUSB1V5: 1500 mV normal standby
VUSB1V8: 1800 mV normal standby
VUSB3V1: 3100 mV normal standby
twl4030_usb twl4030_usb: Initialized TWL4030 USB module
VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby
VDAC: 1800 mV normal standby
VDVI: 1800 mV normal standby
VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
Advanced Linux Sound Architecture Driver Version 1.0.25.
Switching to clocksource 32k_counter
usbhs_omap usbhs_omap: xclk60mhsp1_ck set parentfailed error:-22
usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NFS: Registering the id_resolver key type
msgmni has been set to 972
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
OMAP DSS rev 2.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
console [ttyO2] enabled
omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
brd: module loaded
No NAND device found
No NAND device found
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver smsc75xx
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
usbcore: registered new interface driver int51x1
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-omap.0 supply hsusb0 not found, using dummy regulator
ehci-omap.0 supply hsusb1 not found, using dummy regulator
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
ohci-omap3 ohci-omap3.0: irq 76, io mem 0x48064400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
mousedev: PS/2 mouse device common for all mice
twl_rtc twl_rtc: Power up reset detected.
twl_rtc twl_rtc: Enabling TWL-RTC
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
cpuidle: using governor ladder
cpuidle: using governor menu
usb 1-2: new high-speed USB device number 2 using ehci-omap
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
OMAP3 Beagle/Devkit8000 SoC init
soc-audio soc-audio: ASoC machine omap3beagle should use snd_soc_register_card()
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 5 ports detected
twl4030-codec twl4030-codec: ASoC: Failed to create Capture debugfs file
asoc: twl4030-hifi <-> omap-mcbsp.2 mapping ok
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP: cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
sr_init: No PMIC hook to init smartreflex
smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
SmartReflex Class3 initialized
clock: disabling unused clocks to save power
registered taskstats version 1
omapfb omapfb: no driver for display: dvi
omapfb omapfb: cannot parse default modes
Console: switching to colour frame buffer device 90x35
VDVI: incomplete constraints, leaving on
console [netcon0] enabled
netconsole: network logging started
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
ALSA device list:
  #0: omap3beagle
Waiting for root device /dev/mmcblk0p2...
usb 1-2.1: new high-speed USB device number 3 using ehci-omap
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address b368
mmcblk0: mmc0:b368 USD   7.46 GiB
 mmcblk0: p1 p2 p3
smsc95xx v1.0.4
smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc95xx USB 2.0 Ethernet, 46:f0:fa:83:f6:3f
kjournald starting.  Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
devtmpfs: mounted
Freeing init memory: 344K
INIT: version 2.88 booting
Starting udev
udev[60]: starting version 164
kjournald starting.  Commit interval 5 seconds
EXT3-fs (mmcblk0p3): using internal journal
EXT3-fs (mmcblk0p3): mounted filesystem with ordered data mode
Starting Bootlog daemon: bootlogd.
Configuring network interfaces... udhcpc (v1.19.4) started
Sending discover...
smsc95xx 1-2.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
Sending discover...
Sending select for 192.168.42.143...
Lease of 192.168.42.143 obtained, lease time 3600
adding dns 192.168.42.100
done.
Starting portmap daemon...
Mon May  7 20:56:00 UTC 2012
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
ip_tables: (C) 2000-2006 Netfilter Core Team
Starting Dropbear SSH server: nf_conntrack version 0.5.0 (7782 buckets, 31128 max)

NET: Registered protocol family 10
dropbear.
Starting Distributed Compiler Daemon: distcc.
Starting syslogd/klogd: done
...